Recording Mode Setting - JVC GR DV 3 Instructions Manual

Recording Mode Setting

Set depending on your preference.
Lock button
Power lamp
Power dial
Select Dial
1
SELECT OPERATION MODE
Set the Power Dial to " " while pressing down
the lock button located on the dial.
2 PULL OUT VIEWFINDER
Pull out the viewfinder fully.
The power lamp comes on and the camcorder
is turned on.
3 ACCESS RECORDING MENU
Press MENU. The Recording Menu appears.
4 SET RECORDING MODE
First move the pointer and highlight bar to
"REC MODE" by rotating the Select Dial. Press
the Select Dial and the parameter "SP" or "LP"
is highlighted. Select "SP" or "LP" by rotating
the Select Dial. Press the Select Dial twice to
exit from the Recording Menu.
•"LP" (Long Play) is more economical,
providing 1.5 times the recording time.
•Audio Dubbing is impossible on a tape
recorded in the LP mode.
MENU button
Recording mode indicator
SP
NOTES:
If the recording mode is switched during
recording, the playback picture will be blurred at
the switching point.
It is recommended that tapes recorded in the LP
mode on this camcorder be played back on this
camcorder.
During playback of a tape recorded on another
camcorder, blocks of noise may appear or there
may be momentary pauses in the sound.
Display
Recording Menu
4 REC MODE
WIDE MODE
ZOOM
DIS
GAIN UP
TO DATE / TIME MENU
TO SYSTEM MENU
END
4 REC MODE
WIDE MODE
ZOOM
DIS
GAIN UP
TO DATE / TIME MENU
TO SYSTEM MENU
SP
END
LP
13
EN
SP
OFF
40X
ON
AGC
SP
OFF
40X
ON
AGC