Kx-T77Xx Incoming Lamp Control - Panasonic KX-TA624 Installation Manual Addendum

[968] KX-T77xx Incoming Lamp Control (Additional)
Description
Enable or disable to flash the Message/Ringer Lamp when an extension is in the following
status:
– A call is waiting when Call Waiting Tone 1 is assigned.
– A call is incoming to Doorphone 4.
– A call with Caller ID information is waiting during a conversation
– No ringing when a call is incoming to a doorphone, but chiming a doorbell/door chime.
This programming is available for the KX-T77 series only.
Selection
• Disable (Message/Ringer Lamp — Off)/Enable (Message/Ringer Lamp — Flashing)
Default
Disable
Programming
1.
Enter 968.
Display: T77xx Incom.Lamp
2.
Press NEXT.
Display example: Disable
3. Keep pressing SELECT until the desired selection is displayed.
4. Press STORE.
5. Press END.
Conditions
None
Feature References
— in the Installtation Manual
Call Waiting
Caller ID Call Waiting
Doorphone Call
— in the Additional Instructions for the Doorbell/Door Chime Users
Doorbell/Door Chime
System Programming
9