Removing The I/O Panel - Dell Precision Workstation 370 User's & Service Manual

1 chassis-intrusion switch
connector
2 speaker connector
3 front-panel IEEE 1394
connector
4 audio connector
5 front panel connector
6 control-panel connector

Removing the I/O Panel

1. Follow the procedures in
2. Disconnect all cables that are connected to the I/O panel.
Note the routing of the control panel cable as you remove it from the computer so that you can replace it correctly.
3. From inside the computer cover, remove the mounting screw that secures the I/O panel to the computer.
4. Remove the I/O panel from the computer.
Mini-Tower Computer
7 headphone connector
8 IEEE 1394 connector
9 USB 2.0 connector
(2)
10 USB 2.0 connector
(2)
11 diagnostic lights (4)
"Before You Begin."