Dell Precision Workstation 370 User's & Service Manual page 35

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in
the Product Information Guide.
NOTICE: This process erases both the system and setup passwords.
1. Follow the procedures in
Jumper Setting
PSWD
CLR_CMOS
jumpered
2. Locate the 3-pin password jumper (PSWD) on the system board, and attach the jumper plug to pins 2 and 3 to clear
the password. For more information for the mini-tower computer, see
computer, see "System Board
NOTE: When you receive your computer, the jumper plug is attached to pins 1 and 2.
3. Close the computer
"Before You Begin."
unjumpered
Components."
cover.
Description
Password
features are
enabled
Password
features are
disabled
Normal
CMOS
function
Clears the
CMOS
settings
"System Board Components" for the desktop