Removing The Clutch; Checking The Friction Plates - Yamaha XT660R S Service Manual

1
3
2
1
http://manuals.magnamaniac.com
5 - 44
CLUTCH
EAS00275

REMOVING THE CLUTCH

1. Remove:
• clutch cover 1
NOTE:
Loosen each bolt 1/4 of a turn at a time, in
stages and in a crisscross pattern. After all of
the bolts are fully loosened, remove them.
2. Straighten the lock washer tab.
3. Loosen:
• clutch boss nut 1
NOTE:
_
While holding the clutch boss 2 with the uni-
versal clutch holder 3, loosen the clutch boss
nut.
Universal clutch holder
90890-04086
4. Remove:
• clutch boss nut
• lock washer
• clutch boss
EAS00280

CHECKING THE FRICTION PLATES

The following procedure applies to all of the
friction plates.
1. Check:
• friction plate 1
• friction plate 2
• friction plate 3
Damage/wear → Replace the friction plates
as a set.
ENG