Replacing The Rear Brake Pads - Yamaha XT660R S Service Manual

È
É
1
2
3
FRONT AND REAR BRAKES
a
a
http://manuals.magnamaniac.com
4 - 24
d. Install new brake pads and new brake pad
springs.
NOTE:
_
The arrow a on the brake pad spring must
point in the direction of rotation.
È XT660R
É XT660X
L LLL L LLL L L LLL L
5. Install:
• brake pad pin
• brake pad clip
• brake caliper
6. Check:
• brake fluid level
Below the minimum level mark a → Add
the recommended brake fluid to the proper
level.
Refer to "CHECKING THE BRAKE FLUID
LEVEL" in chapter 3.
7. Check:
• brake lever operation
Soft or spongy feeling → Bleed the brake
system.
Refer to "BLEEDING THE HYDRAULIC
BRAKE SYSTEM" in chapter 3.
EAS00583

REPLACING THE REAR BRAKE PADS

NOTE:
_
When replacing the brake pads, it is not neces-
sary to disconnect the brake hose or disas-
semble the brake caliper.
1. Remove:
• rear wheel
• brake caliper
Refer to "REAR WHEEL, BRAKE DISC,
AND REAR WHEEL SPROCKET".
2. Remove:
• brake pad clip 1
• brake pad pin 2
• brake pads 3
• brake pad springs
CHAS
L LLL L L LLL L L LLL L
40 Nm (4.0 m · kg, 29 ft · lb)
LLL