Ford Expedition 2000 Workshop Manual page 7

2000 Expedition/Navigator Workshop Manual
11. Install the power steering reservoir.
Position the reservoir.
Install the two lower bolts.
Install the upper bolt.
12. Install the PCV hose.
13. Install the throttle body adapter and the four bolts. Tighten the bolts in two stages.
Stage 1: Tighten to 10 Nm 89 (lb-in)
Stage 2: Tighten an additional 90 degrees.
14. Install the EGR valve to exhaust manifold tube.
Hand-tighten the fittings.
Tighten the upper fitting.
Tighten the lower fitting.
Connect the two vacuum hoses.
http://www.fordtechservice.dealerconnection.com/pubs/content/~WSYJ/~MUS~LEN/20/S...
Page 7 of 10
9/11/2009