Olympus STYLUS 1 Instruction Manual page 94

Monitor indication
Internal camera
temperature is too high.
Please wait for cooling
before camera use.
Battery Empty
No Connection
No Paper
No Ink
Jammed
Settings Changed
12
Print Error
Cannot Print
94
Possible cause
The internal temperature of
the camera has risen due to
sequential shooting.
The battery is drained.
The camera is not connected to
the computer or printer correctly.
There is no paper in the printer.
The printer has run out of ink.
The paper is jammed.
The printer's paper cassette has
been removed or the printer has
been manipulated while making
settings on the camera.
There is a problem with the
printer and/or camera.
Pictures recorded on other
cameras may not be printed on
this camera.
Corrective action
Turn off the camera and wait
for the internal temperature
to cool.
Wait a moment for the camera
to turn off automatically. Allow
the internal temperature of
the camera to cool before
resuming operations.
Charge the battery.
Disconnect the camera and
connect it again correctly.
Load some paper in the
printer.
Replace the ink cartridge in
the printer.
Remove the jammed paper.
Do not manipulate the printer
while making settings on the
camera.
Turn off camera and printer.
Check the printer and remedy
any problems before turning
the power on again.
Use a personal computer to
print.