Olympus STYLUS 1 Instruction Manual page 83

Custom printing
1
Connect the camera to the printer using the supplied USB cable and turn
the camera on.
• When the camera is turned on, a dialog should be
displayed in the monitor prompting you to choose a
host. If it is not, select [Auto] for [USB Mode] (P. 68) in the
camera custom menus.
Use FG to select [Custom Print].
2
• [Do Not Remove USB Cable] will be displayed, followed
by a print-mode selection dialog.
• If the screen is not displayed after a few minutes, disconnect the USB cable and start
again from Step 1.
3
Follow the operation guide to set a print option.
Selecting the print mode
Select the type of printing (print mode). The available print modes are as shown below.
Print Prints selected pictures.
Prints all the pictures stored in the card and makes one print for
All Print
each picture.
Prints multiple copies of one image in separate frames on a single
Multi Print
sheet.
All Index Prints an index of all the pictures stored in the card.
Prints according to the print reservation you made. If there is no
Print Order
picture with print reservation, this is not available.
Setting the print paper items
This setting varies with the type of printer. If only the printer's STANDARD setting is
available, you cannot change the setting.
Size Sets the paper size that the printer supports.
Selects whether the picture is printed on the entire page or inside a
Borderless
blank frame.
Selects the number of pictures per sheet. Displayed when you have
Pics/sheet
selected [Multi Print].
USB
Storage
MTP
Easy Print
Custom Print
Set
10
83