Ford F-150 1999 Workshop Manual page 2

1999 F-150/250 Workshop Manual
7. Remove the shock absorber electronic steering sensor (18B015).
1. Disconnect the electrical connector.
2. Remove the screws.
3. Remove the shock absorber electronic steering sensor.
8. On tilt steering column equipped vehicles, remove the sensor ring.
1. Remove the steering column lower bearing spring.
2. Remove the sensor ring.
9. On fixed steering column equipped vehicles, remove the snap ring from the bottom of the steering column shaft.
10. Remove the steering column bearing tolerance ring (3L539) from the steering column shaft.
http://www.fordtechservice.dealerconnection.com/pubs/content/~WSX1/~MUS~LEN/19/S...
16
1/5/2011