Temperature Display; Flame Height; Night Light Dimmer Control - Napoleon LHD62N Installation And Operating Instructions Manual

40
8.3

TEMPERATURE DISPLAY

A. With the system in the "OFF" position, press the
EN
Temperature Key and the Mode Key at the same
time to change from degrees F to C.
B. Look at the LCD screen on the Transmitter to
verify that a C or F is visible to the right of the
Room Temperature display.
8.4

FLAME HEIGHT

The remote control has six (6) fl ame levels. With the
system on and the fl ame level at the maximum, press
the Down Arrow Key once and it will reduce the fl ame
height by one step until the fl ame is turned off.
The Up Arrow Key will increase the fl ame height each
time it is pressed. If the Up Arrow Key is pressed while
the system is on but the fl ame is off, the fl ame will
come on the high position. A single "beep" will confi rm
reception of the command.
8.5

NIGHT LIGHT DIMMER CONTROL

The auxiliary function controls the Night Light
dimmable control.
A. Use the Mode Key to guide you to the Night
Light icon.
B. The intensity of the output can be adjusted
through 6 levels. Use the UP/DOWN arrow
keys to adjust the output level. A single beep will
confi rm reception of the command.
W415-1068 / B / 01.02.14
73
76
OFF
FLAME OFF
76
FLAME AT LEVEL 5
with
TM
76
OFF
°F
23
35.5A
76
°F
FLAME AT LEVEL 1
76
°F
Hi
FLAME AT "HI" LEVEL 6
35.8A
76
°F
35.21
°C
°F
°F
°F