www.gateway.com
Replacing the CMOS battery
Tips & Tricks
You do not need to unplug the keyboard
from the notebook.
Tools you need to complete this task:
Flat-blade driver
Phillips #0 screwdriver
Screws removed during this task:
2 black (keyboard cover)
To replace the CMOS battery:
Complete the steps in
1
Remove the keyboard cover by following the instructions in
2
the keyboard cover" on page
Open the keyboard compartment by following the instructions in
3
"Replacing the keyboard" on page
Locate the old battery on the system board.
4
- OR -
1-3 black (keyboard)
"Preparing the notebook" on page
26.
28.
Replacing the CMOS battery
Scribe or non-marring tool
5.
"Replacing
33