Display; Blue Back; Screen Saver; Bd Mix Sound - JVC 1010MTH-SW-MT Instructions Manual

DTS-HD
For setting audio output to "BITSTREAM" or "PCM".
Setting Values
BITSTREAM Use this setting when connecting a
device that is able to decode "DTS-HD".
PCM Audio input will be changed and output as
"PCM".
Use this setting when connecting a device
that is unable to decode "DTS-HD".
AAC
For setting audio output to "BITSTREAM" or "PCM".
Setting Values
BITSTREAM Use this setting when connecting a
device that is able to decode "AAC".
PCM Audio input will be changed and output as
"PCM".
Use this setting when connecting a
device that is unable to decode "AAC".
Memo:
Audio sound may not be properly played back if the audio
equipment in use does not support "BITSTREAM" output.
In this case, set to "PCM".
DV IN AUDIO SETTING
For changing the audio recording settings during DV input.
Setting Values
STEREO 1 Records the audio sound during video
recording (L1, R1).
STEREO 2 Records audio sound that is added later
(L2, R2), such as during editing.
MIX Records "STEREO 1" and "STEREO 2"
sounds.

BD MIX SOUND

For setting a mixture of BD video secondary audio and
operation sounds output.
Setting
Values
OFF Outputs main audio only.
ON Outputs a mixture of BD video secondary
audio and operation sounds during playback
of BD-Videos that contain BD video
secondary audio and menu operation
sounds.
Memo:
Output is converted to Dolby Digital or DTS according to
the main audio when the "DIGITAL OUT" item is set to
"BITSTREAM".
Description
Description
Description
Description

Display

.
ON SCREEN GUIDE
For displaying operation details.
Setting Values
AUTO Appears for five seconds when an
operation is performed.
OFF Not displayed.

BLUE BACK

For setting the screen display when there is no signal input.
Setting Values
OFF Displays screen as it is.
ON Switches display to a blue screen.

SCREEN SAVER

For setting whether to use a screensaver.
Setting
Values
OFF Screen saver is not used.
ON Screen saver is used. Switches to the burn-
in prevention screen when the unit is not
operated for more than five minutes.

OSD LANGUAGE

For setting the language for messages displayed on-screen.
Settings Menu
Description
Description
Description
79