Page 1 BLU-RAY DISC & HDD RECORDER SR-HD2700U INSTRUCTIONS SR-HD2700E OPEN/ CLOSE INPUT MEDIA SELECT DIRECT/ STANDBY/ON MODE SELECT RESET BD/SD MONITOR STOP PLAY PAUSE HDV/DV IN Please read the following before getting started: For Customer Use: Thank you for purchasing this product.
Page 2: Safety Precaution
Safety Precaution Cautions CLASS 1 LASER PRODUCT REPRODUCTION OF LABELS WARNING LABEL INSIDE OF THE UNIT CAUTION AVIS RISK OF ELECTRIC SHOCK OF ELECTRIC SHOCK RISQUE DE CHOC ELECTRIQUE DE CHOC ELECTRIQUE NE PAS OUVRIR. DO NOT OPEN NOT OPEN - NE PAS OUVRIR.
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS CAUTION: Changes or modifications not approved by JVC could void user’s 1) Read these instructions. authority to operate the equipment. 2) Keep these instructions. 3) Heed all warnings. Declaration of Conformity 4) Follow all instructions. Model Number: SR-HD2700U 5) Do not use this apparatus near water.
Page 4 The A mark signals a reference to another page for instructions ● DISCLAIMER OF LIABILITY JVC shall not be liable for any loss relating to the unit’s failure to or related information. properly record, store or playback any content (video, audio or ●...
Page 5 European representative of JVC KENWOOD Corporation is: Dangerous voltage inside. Refer internal servicing to qualified JVC Technical Services Europe GmbH service personnel. To prevent electric shock or fire hazard,...
Page 6 POWER CONNECTION This equipment has been designed and manufactured to meet international safety standards but, like any electrical The power supply voltage rating of this product is AC 220 – 240 V equipment, care must be taken if you are to obtain the best (For European countries, Asian countries, and United Kingdom).
Page 7 Safety Precaution European Union only EMC Supplement This equipment is in conformity with the provisions and protection requirements of the corresponding European Directives. This equipment is designed for professional video appliances and can be used in the following environments: Controlled EMC environment (for example purpose built broadcasting or recording studio), and rural outdoors environment (far away from railways, transmitters, overhead power lines, etc.) In order to keep the best performance and ensure electromagnetic compatibility, we recommend to use cables not exceeding the following length:...
Page 8: Table Of Contents
Contents Audio/subtitle settings ............66 Playback settings .............. 66 Video settings ..............67 Safety Precaution Editing Safety Precaution ..............2 Editing .................. 68 Getting Started Entering Characters .............. 69 Character List ..............70 Key Features ................9 Grouping ................71 How to Read this Manual ............
Page 9: Key Features
JPEG : JPEG (still picture) file disc camcorders Contents of this manual In addition to AVCHD, HDV and DV, JVC Everio file formats are also compatible, and digital dubbing can be done. 0 All rights reserved by JVC KENWOOD Corporation.
Page 10: Other Precautionary Notes
0 SD and the SDHC logo are trademarks of SD-3C, LLC. Under no circumstances shall JVC KENWOOD take any 0 i.LINK and the i.LINK logo are trademarks. responsibility for any infringements of copyright caused by 0 “AVCHD”...
Page 11: Hard Disk Drive (Hdd)
0 It is particularly effective to perform servicing before the humid rainy season. Do not connect any video cameras that are not made by JVC to the USB terminal 0 Doing so may result in malfunction. 0 Please read through “SD Cards” (A P 12) if you are using a USB card reader.
Page 12: Sd Cards
SD Cards Discs Handling of SD cards BD recording formats Note : BDAV mode 0 The disc operation display icon appears blinking and 0 Videos can be edited (chapter edit etc) and new videos can “READING” is displayed on the display window when the SD be added to the disc.
Page 13 0 To perform high-speed dubbing, make use of a disc that supports high-speed recording. 0 This unit can play back and record only PAL signals. NTSC signals can also be played back on the BD/DVD deck. (SR-HD2700E) 0 This unit can play back and record only NTSC signals. (SR-HD2700U)
Page 14: Precautions On The Use Of Discs
Precautions on the Use of Disc storage Discs 0 Avoid storing the disc at the following locations. Places that are subject to high humidity, dust, or mold growth Maintenance of discs Places that are exposed to direct sunlight or near a heater Inside a car during summer 0 Dirt attached to the disc, such as fingerprints and dust, may 0 Do not drop the disc or subject it to strong impact.
Page 15: On-Screen Displays
On-screen Displays Menu operation Pressing the remote control buttons below calls up the Status display respective menu screens. 0 [SET UP], [NAVIGATION], [EDIT], [INFORMATION Displays the current settings and operating status (such as CORRECT], [DUBBING], [MEDIA MANAGE] playback, pause) of this unit. 0 Press any of the [ J / K / H / I ] buttons to move to a specific Pressing the [ON SCREEN] button on the remote control menu item (yellow item indicated by a small arrow).
Page 16: Name And Function Of Parts
Name and Function of Parts Front panel A [ A ] button N Playback control buttons [ I ] button Switches operation on or off. Plays back the data. B Disc tray [ o ] button C [ M ] button Stops playback/recording.
Page 17: Display Window
Display window English messages appear for a number of operations. HDD/DISC remaining level display (Examples) HELLO : When the power plug is inserted Dubbing display READING : When reading the disc Disc status display ONSCREEN : Upon moving to the playback navigation screen HDMI output display Memo :...
Page 18: Remote Control
Remote control M [REC MODE] For checking the recording mode settings and amount of time remaining. N [ON SCREEN] Displays information on the screen. O [PROGRESSIVE SCAN] Switches the resolution of the image output. P [AUDIO] Switches the playback audio. Q [EDIT] Displays the editing menu screen.
Page 19 h [MARK] Remote control codes Adds a chapter mark during playback or recording. Select By setting a remote control code for the unit and remote control, multiple titles from the playback navigation screen or other you can prevent two recorders from operating simultaneously screens.
Page 20: Connecting A Monitor
Connecting a Monitor Connecting using an S-video cable For connecting an S-video cable (sold separately). To display video images from this unit, connect it to a monitor. 0 This unit supports connections using “HDMI cable”, “component video cable”, “S-video cable”, or “video cable”. Memo : 0 Switch to the appropriate monitor input according to the type of connection cable used.
Page 21: Connecting An Amplifier
Connecting an Amplifier Connecting a Video Camera or Other Equipment Connecting an audio amplifier Connecting a video camera Connecting using an audio cable Connecting via the i.LINK terminal INPUT MEDIA SELECT ONE TOUCH MODE SELECT BD/SD DUBBING HDV/DV IN Connecting via the USB terminal INPUT MEDIA SELECT ONE TOUCH...
Page 22: Connecting External Devices
Connecting External Devices Connecting the Power Supply Connecting a wired remote control Connect the supplied power cable to this unit as follows. Using a wired connection enables stable control of this unit from an external device. Operation is possible using any code (1 to 4) regardless of the 1 Connect the supplied power cable to the AC IN remote control code settings of this unit.
Page 23: Setting And Displaying Date/Time
Setting and Displaying Date/ 4 Select “CLOCK SET”, and press the [OK] button Time 0 The Clock Set menu screen appears. Set the date/time of the built-in clock as follows. The recording date/time is stored on the disc. Setting the date/time Set the date/time of the built-in clock as follows.
Page 24 6 After setting is complete, select “ENTER”, and 3 Select “CLOCK SET/DISPLAY”, and press the press the [OK] button [OK] button 0 Doing so exits date/time setting, and returns to the initial 0 The Clock Set/Display menu screen appears. screen. 4 Select “DATE DISPLAY”, and press the [OK] Memo : button...
Page 25 4 Select “TIME DISPLAY CHOICE”, and press the Changing the time display style [OK] button You can specify the display style of the time as follows. 0 The Time Display menu screen appears. 1 Press the [SET UP] button on the remote control unit 2 Select “SETUP”, and press the [OK] button 0 The Settings menu screen appears.
Page 26: Setting The Time Code
Setting the Time Code 4 Select “TIME CODE” or “DATE & TIME” You can add a time code, date or time while recording SDI input signals or HDMI input signals with this unit. Memo : 0 Only the date and time can be added during recording of HDMI input signals.
Page 27 4 Press the [ J ] or the [ K ] button to select the Setting “TIME CODE DISPLAY POSITION” display position 1 Press the [SET UP] button on the remote control unit 0 The Settings menu screen appears. LOWER : Sets the time code display position to the bottom LEFT left.
Page 28: Dubbing/Importing
Memo : Dubbing from HDD to BD/DVD 0 For MOV format videos, only videos in the MOV format (HQ mode and SP mode) taken using the JVC ProHD MEMORY High-speed dubbing CARD CAMERA RECORDER GY-HM series (excluding Select this option if you want to significantly shorten the time GY-HM200 and GY-HM170) are compatible.
Page 29: Dubbing Chart
“4:3”. MOV* : MOV format files (recorded in the HQ mode and SP mode) using the JVC ProHD MEMORY CARD CAMERA RECORDER GY-HM series (excluding GY-HM200 and GY-HM170)
Page 30: Formatting
Note : 0 If a disc is formatted using an equipment not manufactured by JVC, the disc may not be read correctly even though it corresponds to the chart below. In this case, reformat the disc using this unit, or make use of another blank disc.
Page 31 5 Select “YES”, and press the [OK] button in the Cancel formatting format confirmation screen 1 Press the [OPTION] button while formatting 0 Formatting starts. 0 After formatting is complete, a “THE DISC HAS BEEN 2 Select “STOP”, and press the [OK] button FORMATTED”...
Page 32 4 Select “YES”, and press the [OK] button Formatting an SD Card 1 Insert the SD card to be formatted into the [SD SLOT] 0 With the terminal side facing down, insert the SD card until a “click” sound is heard. 0 Formatting starts.
Page 33: Recording Modes
Recording Modes Maximum recording time for each recording mode You can specify a recording mode according to the intended use. Setting the video to a high picture quality shortens the maximum recording time, while setting to a lower picture quality lengthens the recording time. Refer to the following table for the maximum recording time in the respective modes.
Page 34 0 Dubbing to a DVD cannot be done in HD picture quality. DR mode 0 HDV, MOV*/MXF* and SD-VIDEO (JVC Everio MPEG2 TS) titles can be imported using the DR mode. MOV* : MOV format files (recorded in the HQ mode and...
Page 35: Importing Data From A Bd/Dvd To The Hdd
Importing Data from a Full import BD/DVD to the HDD 1 Select “FULL IMPORT” in the import selection screen, and press the [OK] button Data can be imported from a BD/DVD to the HDD as follows. 0 A check mark is added to the “FULL IMPORT” item. 0 File formats that can be imported 2 Select “NEXT”, and press the [OK] button Videos...
Page 36 7 Select “START”, and press the [OK] button Specify a title 1 Select “SEL. TITLE(VIDEO)” in the import selection screen, and press the [OK] button 0 A check mark is added to the “SEL. TITLE(VIDEO)” item. 2 Select “NEXT”, and press the [OK] button 0 Importing of titles starts according to the sequence in the created title list.
Page 37: Importing Data From A Usb-Compatible Device To The Hdd
JVC GY-HM890/GY-HM850 series, please refer to the instruction manual for the JVC GY-HM890/GY-HM850 series. 0 Import of MOV files recorded using JVC GY-HM series SP mode 1080i requires a duration that is about 1.3 times longer than the usual time.
Page 38 USB device is recognized. onto the SD card. 2 Press the [DUBBING] button on the remote If using a JVC camcorder that has two memory card slots: control unit Put the memory card that has the required data in slot A.
Page 39 Memo : Full import 0 Press the [MARK] button. A check mark will appear beside the 1 Select “FULL IMPORT” in the import selection title. All titles with a check mark can be added to the list at the same screen, and press the [OK] button time.
Page 40: Importing Data From An Sd Card To The Hdd
JVC GY-HM890/GY-HM850 series, please refer to the instruction manual for the JVC GY-HM890/GY-HM850 series. 0 Import of MOV files recorded using JVC GY-HM series SP mode 1080i requires a duration that is about 1.3 times longer than the usual time.
Page 41 The amount of titles in the HDD has reached the maximum MOV* : MOV format files (recorded in the HQ mode and amount SP mode) using the JVC ProHD MEMORY CARD A dubbing title list has not been created CAMERA RECORDER GY-HM series (excluding Check “Troubleshooting”...
Page 42: Importing Data From An I.link-Compatible Device To The Hdd
Doing so may result in loss or damage of the titles. 0 For example, during full import of HDV content from JVC 1 Select “IMPORT FROM BEGINNING”, and press GY-HD100 via i.LINK connection, the beginning of the image the [OK] button may not be captured if GY-HD100 is not set as follows.
Page 43 3 Select “RECORDING MODE”, press the [OK] 3 Select “RECORDING MODE” and press the [OK] button, and select from the pop-up menu button to display the pop-up menu 0 Select “XP”, “SP”, “LP”, or “EP” from the “RECORDING 0 Select “XP”, “SP”, “LP”, or “EP” from the “RECORDING MODE”...
Page 44: Importing Data From A Lan-Compatible Device To The Hdd
You can delete these files on the Playback 1280x720/59.94p, 1280x720/29.97p, 1280x720/23.98p Navigation screen of the recorder. (SR-HD2700E) 0 We do not guarantee all the operations of FTP transfer 1920x1080/50i, 1920x1080/25p, 1440x1080/50i, depending on factors such as the PC environment.
Page 45: Dubbing A Title From The Hdd To A Bd/Dvd
When a BDAV/BDMV disc is created (high-speed A Select the titles to dub, and press the [OPTION] button dubbing) by importing content recorded in the JVC GY-HM series (HQ mode or SP mode). B Select “DUB”, and press the [OK] button When a BDAV disc is created (high-speed dubbing) by C Follow Steps 3 to 4 of “Preparation”...
Page 46 Memo : Memo : 0 High-speed dubbing 0 Press the [MARK] button. A check mark will appear beside Select this option if you want to significantly shorten the time the title. required for dubbing. All titles with a check mark can be added to the list at the same Make use of a disc that supports high-speed recording.
Page 47 : 1920 x 1080 0 “ON” DVD : 720 x 480 (SR-HD2700U) 720 x 576 (SR-HD2700E) Repeat playback from the first title will start 0 When a still image is used, the two vertical or horizontal edges automatically after all the titles are played back.
Page 48: Dubbing Still Images From The Hdd
Dubbing Still Images from 4 Select “NEXT”, and press the [OK] button the HDD Memo : 0 A message appears on the monitor when dubbing cannot be performed in the following cases. When this occurs, replace Still images stored in the HDD can be dubbed to a BD-RE or an the disc or SD card with one that is usable.
Page 49 6 Select “START”, and press the [OK] button Dubbing from the Playback Navigation screen Dubbing can also be performed from the Playback Navigation screen. 1 Select the still images to dub, and press the [OPTION] button 0 Dubbing starts. A progress bar is displayed during the dubbing process.
Page 50: Enabling Playback On Other Devices (Finalizing)
Enabling Playback on Other 5 Setting the top menu items Devices (Finalizing) DVD-R and DVD-RW discs may need to be finalized before they can be played on other DVD players. BD-R discs need to be finalized before they can be played on other BD players.
Page 51 6 Select “FINALIZE”, and press the [OK] button Unfinalizing a disc Only DVD-RW discs that are finalized on this unit can be unfinalized. After a disc is unfinalized, addition of new titles and editing are possible. Note : 0 All discs except DVD-RW (VR mode) cannot be unfinalized. To unfinalize a disc 1 Set a DVD-RW disc that is finalized by this unit on the disc tray...
Page 52: Copying The Entire Disc
Copying the Entire Disc 4 Select “NEXT”, and press the [OK] button 0 The disc tray will open automatically. Copying the entire disc allows all contents on a BD (BDAV, 5 Set the source BD or DVD on the disc tray BDMV) or DVD (AVCHD, DVD-Video, DVD-VR) to be copied 6 Select “START”, and press the [OK] button onto another disc.
Page 53 9 Complete the entire disc copying 0 After copy is complete the tray will open automatically, and copy of the entire disc ends. Memo : 0 The screen prompting you to insert a new disc appears repeatedly until this unit has finished copying the number of discs specified in Step 3.
Page 54: Recording
Switching External Input Pausing recording You can pause the process while recording videos to the HDD Pressing the [INPUT SELECT] button on the unit or the remote or a BD/DVD. control displays the following pop-up screen. You can now use the [INPUT SELECT] button again or the 1 Select the location to record videos to [ J/K ] buttons on the remote control to select an external input 2 Press the [ W ] button on this unit or the remote...
Page 55: Recording Using External Inputs
Recording Using External Checking whether SDI or HDMI input signals Inputs can be recorded 1 Press the [OPTION] button on the remote control, Videos from an external input (SDI, HDMI, HDV/DV or L-1) can and select “INPUT SIGNAL” be recorded to the HDD or a BD/DVD. 0 A screen showing the details of the SDI or HDMI input Videos on an external device that is connected to i.LINK (HDV/ signal appears.
Page 56 Recordable Media Recordable Media Recording DVD-R/RW BD-R/RE BD-R/RE Mode (VR Format/Video Format) (BDAV Format) (BDMV Format) AF (HD) HD-SDI/HDMI (HD)/HDV HD-SDI/HDMI (HD)/HDV HD-SDI/HDMI (HD)/HDV AN (HD) HD-SDI/HDMI (HD)/HDV HD-SDI/HDMI (HD)/HDV HD-SDI/HDMI (HD)/HDV AL (HD) HD-SDI/HDMI (HD)/HDV HD-SDI/HDMI (HD)/HDV HD-SDI/HDMI (HD)/HDV AE (HD) HD-SDI/HDMI (HD)/HDV HD-SDI/HDMI (HD)/HDV...
Page 57 EP: 352×240/29.97p EP: 352×240/29.97p XP to LP: 720×480/59.94i XP to LP: 720×480/59.94i XP to LP: 720×480/59.94i 720×480/59.94p EP: 352×240/29.97p EP: 352×240/29.97p EP: 352×240/29.97p Recordable Input Signal (SR-HD2700E) DOWNCONVERSION DOWNCONVERSION DOWNCONVERSION (OFF) (SD CONVERSION) (1440 CONVERSION) Input Signal XP to LP: 720×576/50i 1920×1080/50i...
Page 58: About Playing Back
0 The recording mode and recording time of the selected video MOV* : MOV format files (recorded in the HQ mode and title is displayed at the top right corner of the screen. SP mode) using the JVC ProHD MEMORY CARD CAMERA RECORDER GY-HM series (excluding Operating Playback Navigation...
Page 59 Switching between thumbnail and list displays Switching between video and still image displays You can switch between the thumbnail display and list display of a video. You can switch the display between the video thumbnail list 0 When the video thumbnail list screen is displayed screen and still image thumbnail screen.
Page 60: Option Menu List
Option menu list EDIT INFO Switches to the menu screen of the sub-items. BACK MODIFY TITLE NAME/MODIFY GROUP NAME Returns to the previous screen. Switches to the rename screen for the selected title/group PLAY name. Plays back the selected title/group. For details, refer to “Changing the Title/Group Name”...
Page 61: Video Playback Operation
Video Playback Operation Frequently used button operations [ I ] button 0 If the stop position (resume point) is memorized in the selected video, pressing the button plays back the video from this position. The video may not resume playback depending on the media and settings used.
Page 62 [ v ] button Useful button operations 0 During normal playback, 1.3x playback, slow motion [PB MODE] button playback, fast forward, or fast reverse, pressing the button moves the playback position forward by about 30 seconds. 0 Displays the Playback Settings screen, which enables you to Pressing the button multiple times moves playback to the modify the settings.
Page 63: Playing Videos On A Bd/Dvd
Playing Videos on a BD/DVD Playing an EverioBackup Disc* EverioBackup : Data disc containing high-definition videos Playback starts automatically after a BD/DVD is set. disc* that are recorded in the MPEG2 format using If the Auto Play feature is disabled, play the title using Playback a DVD writer for Everio.
Page 64: Playing Videos On The Hdd
MOV*/MXF*) in the SD card, press the [RED] button to select the format you want to display. MOV* : MOV format files (recorded in the HQ mode and SP mode) using the JVC ProHD MEMORY CARD CAMERA RECORDER GY-HM series (excluding GY-HM200 and GY-HM170)
Page 65: Playing Still Images (Jpeg)
Playing Still Images (JPEG) Enabled button operations during still image playback Still images stored on the HDD/BD/DVD/SD card can be played back using Playback Navigation. [ I ] button Playing still images 0 Pressing the button when a title/group is selected starts playback of the still images in the title/group in a slideshow.
Page 66: Changing Playback Settings
Changing Playback Settings Playback settings Displaying the playback settings menu 1 Press the [PB MODE] button on the remote control unit during the playback of a title 0 The Settings Menu screen appears. 0 The playback settings menu can only be displayed during the playback of a title.
Page 67: Video Settings
Video settings PICTURE QUALITY The following items can be set. Setting Values Description NORMAL Standard picture quality. CINEMA Effective when playing movies. FINE Produces sharp images with enhanced outlines. SOFT Reduces noise that is prominent in the video image. USER SETTING Enables the Details setting. For details, refer to “DETAIL SETTING”.
Page 68: Editing
Editing Before editing This unit mainly edits video images stored on the HDD. To edit video images stored in a disc or SD card, do so after importing them to the HDD. Data on a finalized disc cannot be edited. To edit a finalized disc, you have to either unfinalize the disc, or do so after importing the data to the HDD.
Page 69: Entering Characters
Entering Characters Entering characters 1 Enter characters using the [ 0 ]-[ 9 ], [Z] or [#] Names can be changed or given to stored videos or groups. You can enter characters while referring to the input on the buttons monitor.
Page 70: Character List
Character List ä â ã ç Æ Ç æ å à á Ä Å À Á Â Ã è é ê ë ð È É Ê Ë Ð î ï Ì Í Î Ï ì í £ ö ñ Ö Ø...
Page 71: Grouping
Grouping 5 Select “GROUP”, and press the [OK] button 0 The selected titles and groups are now grouped together. Multiple titles stored on the HDD can be combined into a group. Memo : 0 Only video data stored on the HDD can be grouped. Grouping 1 Press the [NAVIGATION] button on the remote control unit...
Page 72 4 Select “YES”, and press the [OK] button 3 Press the [OPTION] button on the remote control unit 0 All titles within the selected group are ungrouped. 0 A pop-up option list appears. 4 Select “DO NOT GROUP”, and press the [OK] button 0 A confirmation screen for group exclusion appears.
Page 73: Changing The Title/Group Name
Changing the Title/Group Deleting a Title/Group Name Titles/groups can be deleted. When you delete a group, all titles contained within the group are deleted. The saved title/group name can be changed as follows. Memo : Memo : 0 When a title/group is deleted from the HDD, BD-RE, or DVD- 0 A title/group name can be added to video data stored on the RW, the remaining space on the media increases according HDD, BD-RE, BD-R, DVD-RW, or DVD-R, and the name can...
Page 74: Turning On Title/Group Protection
Turning On Title/Group 4 Select “PROTECT”, and press the [OK] button Protection 0 If only a single title was selected in step 2, a confirmation screen for title protection will appear. Titles/groups can be protected. Editing and deletion cannot be performed on protected titles/ groups.
Page 75: Turning Off Title/Group Protection
Turning Off Title/Group 4 Select “UNPROTECT”, and press the [OK] button Protection 0 If only a single title was selected in step 2, a confirmation screen for turning off protection will appear. Protection of a title/group can be turned off. Titles/groups can be edited and deleted after their protection is turned off.
Page 76: Creating A Playlist
Creating a Playlist 5 Edit the playlist accordingly by selecting chapters from the source title according to your preference 0 Edit the playlist. A playlist can be created from the video titles on the HDD. For details, refer to “Editing the playlist”. 0 Playlists can only be created for titles that are stored on the HDD.
Page 77: Editing A Thumbnail
Editing a Thumbnail 4 Select “CHANGE”, and press the [OK] button 0 The displayed still image now becomes the thumbnail image. Thumbnails (index images) can be changed to a still image according to your preference. 5 Select “CONFIRM”, and press the [OK] button Memo : 0 Doing so ends the editing of thumbnails.
Page 78: Editing A Chapter
Editing a Chapter Editing a chapter 1 Press the [EDIT] button on the remote control unit Creating a chapter mark for a saved title enables you to find a specific scene within the title. 0 The Edit menu screen appears. Memo : 2 Select “CHAPTER EDIT”, and press the [OK] 0 All chapter editing functions can be performed on titles stored...
Page 79 Chapter mark insertion (divide chapter) Deleting a video chapter 1 Play the video, and press the [W] button to stop 1 Select the chapter for which you want to delete the video from the chapter edit screen at the scene you want to add a chapter mark 2 Press the [MARK] button on the remote control 2 Press the [DELETE] button on the remote control unit...
Page 80: Dividing
Dividing 6 Select “EXECUTE”, and press the [OK] button 0 A confirmation screen for performing dividing appears. You can select a saved title and divide it into two titles. Memo : 0 Dividing can only be applied to titles stored on the HDD. 0 Titles that are protected cannot be divided.
Page 81: Deleting Scenes
Deleting Scenes D Select “END”, and press the [OK] button Unwanted scenes of a saved title can be deleted. Doing so helps to increase the free space on the disc. Memo : 0 Deleting scenes can only be applied to titles stored on the HDD.
Page 82: Changing The Disc Name
Changing the Disc Name Changing the Shooting Date/ Time The name of a BD or DVD disc can be changed as follows. 1 Set the BD or DVD for which the disc name is to The date/time of the stored video can be changed as follows. be changed on the disc tray 0 The shooting date/time of videos stored on the HDD can be changed.
Page 83: Mode Conversion
Mode Conversion 5 Select “ENTER”, and press the [OK] button 0 The modified shooting date/time is saved. You can convert HD quality video titles saved on the HDD if they Memo : are recorded in the DR, AVC, AF, AN, AL, or AE mode. 0 Alternatively, you can press the [RETURN] button to cancel Seamless : Seamless conversion can be performed to...
Page 84: Changing Settings Of This Unit
Changing Settings of this DTS-HD .............. (A P 88) AAC ..............(A P 88) Unit DV IN AUDIO SETTING ......... (A P 89) BD MIX SOUND ............. (A P 89) Settings changed in the Settings Menu screen are stored on this DISPLAY ..............
Page 85: Setup
Turns off power after six hours. QUICK STARTUP REMOTE CONTROL CODE For remote control units compliant with JVC’s products, different For turning on/off the display window during quick startup and standby mode. remote control codes can be specified for those that are used with this unit.
Page 86: Playback Setting
AUDIO LANGUAGE DEFAULT SETTING For setting the audio sound when playing back BD-Videos or Restores the setting values on the setting screen to their factory DVD-Videos. default values. For details on the language codes, refer to the “Language Code List” (A P 108). Setting Values Description Restores the factory default values.
Page 87: Record
RECORD AUTO MARKING During direct recording to a recording media (HDD or optical disc), you can append chapters by adding a mark at a fixed interval of 10 minutes or 1 hour. Setting Values Description Disables addition of chapters. 10 MINUTES Adds chapters at 10-minute intervals.
Page 88: Audio
AUDIO DIGITAL OUT Set this item according to the device connected to the digital audio output terminal. Dolby Digital For setting audio output to “BITSTREAM” or “PCM”. Setting Values Description BITSTREAM Use this setting when connecting a device that is able to decode “Dolby Digital”. Audio input will be changed and output as “PCM”.
Page 89: Display
DISPLAY DV IN AUDIO SETTING For changing the audio recording settings during DV input. Setting Values Description STEREO 1 Records the audio sound during video recording (L1, R1). STEREO 2 Records audio sound that is added later (L2, R2), such as during editing. Records “STEREO 1”...
Page 90: Connection
4:3 PAN&SCAN Set to this value when connecting to monitors with an aspect ratio of 4:3. Plays (SR-HD2700U)/“576p” (SR-HD2700E) or below, or set the back videos with the left and right edges monitor type to a setting other than “16:9”.
Page 91: Sdi/Component Output
Setting Values Description distorted, or colors are unnatural. 480i Sets output to “480i” or “576i”. (SR-HD2700U) HDMI RGB OUTPUT RANGE 576i (SR-HD2700E) Setting Values Description 480p Sets output to “480p” or “576p”. STANDARD Set to this value for standard uses. (SR-HD2700U)
Page 92: Sdi/Hdmi Connection
SDI/HDMI CONNECTION SDI RECLOCK Setting to “ON” helps to further stabilize the [THROUGH OUT] output. To output signals as they are, set to “OFF”. Setting Values Description Use this setting if you do not want to use the Reclock feature. Use this setting if you want to use the Reclock feature.
Page 93 Memo : DISC SECURITY SETTING SD conversion Memo : SDI and HDMI video input signals supported by this unit are as follows. Conversion is not performed for signal 0 You can protect against changes made to the disk security inputs that are not supported. settings using a password.
Page 94 OVERLAY TYPE SETTING OVERLAY DISP. POSITION SET For specifying the type of overlay during direct recording of SDI For specifying the position for displaying the overlay object. or HDMI input signals using this unit. Setting Values Description Setting Values Description LOWER LEFT Displays the overlay object at the bottom Disables overlay.
Page 95: Network Setting
NETWORK SETTING FTP USER SETTING 0 The username and password can be set in the “FTP USER SETTING”. 0 Select “FTP USER SETTING” and press the [OK] button on the remote control to display the “USERNAME INPUT” screen. Enter the username and press the colored (*1) button on the remote control.
Page 96: Locking The Disc Tray
Locking the Disc Tray Turning on the Mode Lock By turning on the lock for the disc tray, the tray cannot be opened Turning on the mode lock disables all operations using the or closed using the [M] button. buttons on the unit and remote control, except for “Play” and “Record”.
Page 97: External Control
External Control This unit can be controlled using a PC, etc. by connecting them with an RS-232C or LAN cable. RS-232C Specifications 0 Pin layout Mode : Non-synchronous Character length : 8 bits Parity check : Odd Start bit Stop bit Data rate : 9600 bps Direction of...
Page 98: Command
Command Operation Commands Commands for operating functions such as PLAY and REC on the BLU-RAY DISC & HDD RECORDER Command Description Command Description Functions as a key for reversing (REV) a frame. Plays the selected deck. When this command is received during still mode, Stops the selected deck.
Page 99 80-8F 80 : Chapter Search 1st Byte 2nd Byte 3rd Byte Chapter Search Hundreds Tens Ones ASCII codes (30 - 39) E.g. (012) E.g. : When searching the 12th chapter. 81 : Title Search under “ORIGINAL” 1st Byte 2nd Byte 3rd Byte 4th Byte Title Search (ORIGINAL)
Page 100 9F : Remote Data The remote control codes for controlling the wired remote controller via RS-232C is as shown in the following table. The codes apply to all three HDD, BD and SD deck unless otherwise stated. Code Items Remarks MARK HDD/DVD Deck only INPUT SELECT...
Page 101 B8 : Input/Output Selection 1st Byte 2nd Byte External input selection L-1 VIDEO External input selection L-1 S-VIDEO External input selection External input selection External input selection HDMI B8 : Recording Mode Selection 1st Byte 2nd Byte B8 : Simultaneous recording selection 1st Byte 2nd Byte Simultaneous Recording OFF...
Page 102: Subtitle Selection
Subtitle Selection B8 : Subtitle Selection 1st Byte 1st Byte 1st Byte 1st Byte Byte Byte Byte Byte JAPANESE ENGLISH GERMAN FRENCH ITALIAN SPANISH DUTCH SWEDISH NORWEGIAN FINNISH DANISH “Language Code List” (A P 108) External Control...
Page 103 Audio Language Selection B8 : Audio Language Selection 1st Byte 1st Byte 1st Byte 1st Byte Byte Byte Byte Byte JAPANESE ENGLISH GERMAN FRENCH ITALIAN SPANISH DUTCH SWEDISH NORWEGIAN FINNISH DANISH “Language Code List” (A P 108) External Control...
Page 104 CTL Data Sense: For acquiring the lapse counter when there is a media in the selected deck. (*) Acquires the time lapse counter of the HDD during simultaneous recording. JVC Status Sense: Returns data from the unit. (*) Opt TC Data Sense: For acquiring the remaining time by recording mode of the BD/DVD deck during simultaneous recording.
Page 105 0 Title/Track Sense under “ORIGINAL” 1st Byte 2nd Byte 3rd Byte 4th Byte Title/Track Sense (ORIGINAL) Hundreds Tens Ones E.g. (345) E.g. : When the current title under “ORIGINAL” is the 345th title. 0 Title/Track Sense in “PLAY LIST” 1st Byte 2nd Byte 3rd Byte 4th Byte...
Page 106 0 Status Data Sense For acquiring the remaining time in the current recording mode in hours, minutes and seconds for HDD/BD/SD. STATUS 1st Byte 1st Byte 1st Byte 2nd Byte 3rd Byte 4th Byte 5th Byte SENSE HDD/BD/SD HDD/BD/SD HDD/BD/SD HDD/BD/SD bit7 1 (Fixed)
Page 107 Frame (Tens) Frame Sense (Ones) E.g. (01:23:45) 30 E.g. : When time lapse counter is 1 hr 23 min 45 sec. Frame is fixed as 0. 0 JVC Status Sense 1st Byte 2nd Byte 3rd Byte 4th Byte HDD/BD/SD HDD/BD/SD...
Page 108: Language Code List
Language Code List Code Language Code Language Code Language Afar Hindi Ossetian Abkhazian Hiri Motu Panjabi Afrikaans Hungarian Persian Akan Igbo Pali Albanian Icelandic Polish Amharic Portuguese Arabic Sichuan Yi Pashto Aragonese Inuktitut Quechua Armenian Interlingue Rhaeto-Romance Assamese Interlingua (International Auxiliary Romanian language Association) Avar...
Page 109 Hausa Ojibwa Zhuang Hebrew Oriya Zulu Herero Oromo Language Code List...
Page 110: Country Code List
Country Code List Code Country Name Code Country Name Code Country Name Andorra Gambia Niue United Arab Emirates Guinea New Zealand Afghanistan Guadeloupe Oman Antigua and Barbuda Equatorial Guinea Panama Anguilla Greece Peru Albania South Georgia and South Sandwich Polynesia Islands Armenia Guatemala...
Page 111 Fiji Malawi Virgin Islands of the United States Falkland Islands (Malvinas) Mexico Vietnam Micronesia (Federated States of) Malaysia Vanuatu Faroe Islands Mozambique Wallis and Futuna France Namibia Samoa France, Metropolitan New Caledonia Yemen Gabon Niger Mayotte United Kingdom of Great Britain and Norfolk Island Yugoslavia Northern Ireland...
Page 112: Using The Hdmi Consumer Electronics Control (Hdmi Cec)
Press the [NAVIGATION] or [SET UP] button seamless conversion seamless conversion 0 Turning off the power for the TV will also turn the power off for SD-VIDEO(HD)* : SD-VIDEO (JVC Everio MPEG2 TS) this unit automatically. MOV* : MOV format files (recorded in the HQ mode...
Page 113: Troubleshooting
Troubleshooting Reference Problem Symptom Action Page Power does not turn on The “HELLO” message remains displayed, Press the [RESET] button on the front panel. (A P 16) If it does not start up, stop using this unit, and the unit does not start up. unplug the plug from the outlet, and bring it to the local dealers in your area.
Page 114 Reference Problem Symptom Action Page Dubbing cannot be “NEXT” cannot be selected when a title that 0 Dubbing may start when you return to (A P 33) performed recording mode selection to change the cannot be dubbed is chosen. recording mode. 0 Some titles cannot be dubbed depending on their recording mode and format.
Page 115 The component output setting may be Turn the power off, and turn it on again. changed to “480i” (SR-HD2700U) or “576i” (SR-HD2700U) or “576i” (SR-HD2700E) after viewing at a setting of (SR-HD2700E) 1080/24p using an HDMI connection. regardless of the...
Page 116: Frequently Asked Questions On Dubbing
Frequently Asked Questions on Dubbing Reference Problem Symptom Cause Action Page Unable to dub from “SOME TITLES 0 Titles that cannot be dubbed at high 0 Select a setting other than “HIGH- (A P 45) speed are selected after “HIGH- (A P 46) CANNOT BE SPEED DUBBING”...
Page 117: Remarks
Reference Problem Symptom Cause Action Page Unable to import to “SOME TITLES 0 HDD memory is insufficient. 0 Delete unwanted titles recorded in (A P 73) the HDD. CANNOT BE DUBBED” is 0 The amount of titles in the HDD has 0 Delete unwanted titles recorded in (A P 73) reached the maximum amount.
Page 118: Specifications
: 1.0 V(p-p), 75 K (BNC) Video input : *2 : 1.0 V(p-p), 75 K (BNC) *1 : SR-HD2700U: A, SR-HD2700E: B Video output *2 : SR-HD2700U: 1, SR-HD2700E: 2 : Max 2 Vrms / 10 kK (pin jack) Audio input...
Page 119: Important Notice Concerning The Software
Important Notice Concerning the Software...
Page 120 Important Notice Concerning the Software...
Page 121 Important Notice Concerning the Software...
Page 122 Important Notice Concerning the Software...
Page 123: Index
Index AACS ................... 11 LAN ................22, 44, 97 AUDIO CABLE ............17, 21, 20 LANGUAGE CODE ............. 86, 108 AUDIO LANGUAGE ..........66, 86, 103 LOCKING THE DISC TRAY ..........96 AUDIO/SUBTITLE SETTINGS ..........66 AUTO MARKING ..............87 MAC ADDRESS ..............

This manual is also suitable for:

Sr-hd2700u

JVC SR-HD2700E Instructions Manual

Getting Started

Preparation

Dubbing/Importing

Recording

Playing Back

Editing

Settings Menu

Others

Quick Links

Related Manuals for JVC SR-HD2700E

Summary of Contents for JVC SR-HD2700E

This manual is also suitable for:

Table of Contents