Delete Scenes - JVC 1010MTH-SW-MT Instructions Manual

Editing
Dividing (Continued)
Memo:
To cancel the dividing operation, select "CANCEL" and
press the [OK] button.
Alternatively, you can press the [RETURN] button to cancel
the divide operation and return to the initial screen.
The dividing edit screen can also be called up from the
Playback Navigation screen.
① Select the titles to divide, and press the [OPTION]
button
② Select "EDIT", and press the [OK] button
001 002
005 006
.
③ Select "DIVIDE", and press the [OK] button
001 002
005 006
.
70
003 004
007 008
003 004
007 008

Delete Scenes

Unwanted scenes of a saved title can be deleted.
Doing so helps to increase the free space on the disc.
Memo:
Deleting scenes can only be applied to titles stored on the
HDD.
Titles that are protected cannot be deleted. To enable
scene delete of a title, turn off the protection.
For details on turning off the title protection, refer to "Turning
Off Title/Group Protection" (A page 64) .
HD content for which the delete scene operation has been
applied cannot be dubbed to BDMV. Perform seamless
conversion before starting a dubbing operation.
For details, refer to "Mode conversion" (A page 73) .
Delete Scenes
1 Press the [EDIT] button on the remote control
unit
The Edit menu screen appears.
2 Select "DELETE SCENE", and press the [OK]
button
Displays the Title Display screen.
.
3 Select a title, and press the [OK] button
4 Edit the delete scene section
Follow the steps below to edit the section for which delete
scene is to be applied.