Table 86. Post Error Beep Codes - Intel S2600IP Technical Product Specification

Intel® Server Board S2600IP and Intel® Workstation Board W2600CR TPS Appendix E: POST Error Messages and Han
Error Code
85ED DIMM_P1 encountered a Serial Presence Detection (SPD) failure
85EE DIMM_P2 encountered a Serial Presence Detection (SPD) failure
85EF DIMM_P3 encountered a Serial Presence Detection (SPD) failure
8604 POST Reclaim of non-critical NVRAM variables
8605 BIOS Settings are corrupted
8606 NVRAM variable space was corrupted and has been reinitialized
92A3 Serial port component was not detected
92A9 Serial port component encountered a resource conflict error
A000 TPM device not detected.
A001 TPM device missing or not responding.
A002 TPM device failure.
A003 TPM device failed self test.
A100 BIOS ACM Error
A421 PCI component encountered a SERR error
A5A0 PCI Express* component encountered a PERR error
A5A1 PCI Express* component encountered an SERR error
DXE Boot Services driver: Not enough memory available to shadow a
A6A0
Legacy Option ROM.
POST Error Beep Codes
The following table lists the POST error beep codes. Prior to system video initialization, the
BIOS uses these beep codes to inform users on error conditions. The beep code is followed by
a user-visible code on the POST Progress LEDs
Beeps Error Message
1 USB device action
®
1 long Intel TXT security
violation
3 Memory error
2 BIOS Recovery
started
4 BIOS Recovery
failure
The Integrated BMC may generate beep codes upon detection of failure conditions. Beep codes
are sounded each time the problem is discovered, such as on each power-up attempt, but are
not sounded continuously. Codes that are common across all Intel server boards and systems
that use same generation chipset are listed in the following table. Each digit in the code is
represented by a sequence of beeps whose count is equal to the digit.
Revision 1.1
Error Message

Table 86. POST Error Beep Codes

POST Progress Code
NA Short beep sounded whenever a USB device is discovered
in POST, or inserted or removed during runtime
0xAE, 0xAF System halted because Intel
Technology detected a potential violation of system
security.
See Tables 28 and 29 System halted because a fatal error related to the memory
was detected.
NA Recovery boot has been initiated
NA BIOS recovery has failed. This typically happens so quickly
after recovery us initiated that it sounds like a 2-4 beep
code.
Intel order number G34153-003
Response
Major
Major
Major
Minor
Major
Major
Major
Major
Minor
Minor
Minor
Minor
Major
Fatal
Minor
Fatal
Minor
Description
®
Trusted Execution
167