Digital Media Interface (Dmi); Pci Express* Interface; Serial Ata (Sata) Controller - Intel S2600IP Technical Product Specification

Server and workstation board
Hide thumbs Also See for S2600IP:
Table of Contents

Advertisement

Functional Architecture

Digital Media Interface (DMI)

PCI Express* Interface

Serial ATA (SATA) Controller

Serial Attached SCSI (SAS)/SATA Controller
AHCI
Rapid Storage Technology
PCI Interface
Low Pin Count (LPC) Interface
Serial Peripheral Interface (SPI)
Compatibility Modules (DMA Controller, Timer/Counters, Interrupt Controller)
Advanced Programmable Interrupt Controller (APIC)
Universal Serial Bus (USB) Controllers
Gigabit Ethernet Controller
RTC
GPIO
Enhanced Power Management
®
Intel
Active Management Technology (Intel
Manageability
System Management Bus (SMBus* 2.0)
Integrated NVSRAM controller
Virtualization Technology for Directed I/O (Intel
JTAG Boundary-Scan
KVM/Serial Over LAN (SOL) Function
3.3.1
Digital Media Interface (DMI)
Digital Media Interface (DMI) is the chip-to-chip connection between the processor and The
®
Intel
C600-A Chipset. This high-speed interface integrates advanced priority-based servicing
allowing for concurrent traffic and true isochronous transfer capabilities. Base functionality is
completely software-transparent, permitting current and legacy software to operate normally.
3.3.2
PCI Express* Interface
®
The Intel
C600-A Chipset provides up to 8 PCI Express* Root Ports, supporting the PCI
Express* Base Specification, Revision 2.0. Each Root Port x1 lane supports up to 5 Gb/s
bandwidth in each direction (10 Gb/s concurrent). PCI Express* Root Ports 1-4 or Ports 5-8 can
independently be configured to support four x1s, two x2s, one x2 and two x1s, or one x4 port
widths.
3.3.3
Serial ATA (SATA) Controller
®
The Intel
C600-A Chipset has two integrated SATA host controllers that support independent
DMA operation on up to six ports and supports data transfer rates of up to 6.0 Gb/s (600 MB/s)
on up to two ports (Port 0 and 1 Only) while all ports support rates up to 3.0 Gb/s (300 MB/s)
and up to 1.5 Gb/s (150 MB/s). The SATA controller contains two modes of operation – a legacy
mode using I/O space, and an AHCI mode using memory space. Software that uses legacy
mode will not have AHCI capabilities.
34
Intel® Server Board S2600IP and Intel® Workstation Board W2600CR TPS
Intel order number G34153-003
®
AMT)
®
VT-d)
Revision 1.1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

W2600crS2600ip

Table of Contents