Table of Contents
Advertisement
2. INSTALLATION
2.1 Hardware Connection
1. Place the EN2HWI-N3 router in an appropriate location after conducting a site survey.
2. LAN connection: Connect Ethernet cable between your PC/Notebook LAN port & one of
the 4 available LAN ports on EN2HWI-N3.
3. WAN connection: Connect Ethernet cable between WAN port of your DSL/CABLE
modem & WAN port of EN2HWI-N3. Make sure your DSL/Cable modem is already setup
and working well. Contact your ISP (Internet Service Provider) if you have any questions.
4. Connect the supplied power-adapter to the power port and then plug it to a wall power
outlet.
This diagram depicts the hardware configuration:
Computers
LAN
EN2HWI-N3 Router
Wall Power Outlet
www.encore-usa.com
WAN
DC Power Adapter
13
DSL / Cable Modem
Advertisement
Table of Contents
