Parts
LAN Ports (1 – 4)
WAN Port
Power Switch
Antenna
Connector
LAN LED
WAN LED
WLAN LED
Power LED
WPS button
1.5 System Requirements
The following are the minimum system requirements in order to configure the device.
A computer with an Ethernet interface
Operating system that supports HTTP web-browser
1.6 Applications
The wireless LAN products are easy to install and highly efficient. The following list
describes some of the many applications made possible through the power and flexibility
of wireless LANs:
Use an Ethernet cable to connect each port to a computer on
your Local Area Network (LAN).
Use an Ethernet cable to connect this port to your WAN
router.
Turn on or off the device
Interface for the antennas.
This LED will light up once an Ethernet cable is connected to
one of the LAN ports.
This LED will light up once an Ethernet cable is connected to
WAN (Internet) port.
This LED will light up once the RF (wireless LAN) feature is
enabled
This LED will light up once the power cable is connected to
the DC connector.
1- 5 seconds: Activates WPS
6-10 seconds: System Reboot
11+
seconds: Reset to factory default
9
www.encore-usa.com
Description