Four winns 248 Vista Owner's Manual page 228

To clean acrylic plastic:
1) Rinse with plenty of water to wash off as much dirt
as possible.
2) Using your bare hand, along with plenty of water,
feel and remove any dried on dirt or mud.
3) Wash using a soft, grit free cloth or sponge and
mild, nonabrasive soap or detergent.
4) Blot dry using a clean, damp chamois.
NOTICE
Never use a dry cloth, duster, glass cleaning
solutions or citrus cleaner on acrylic plastic.
NOTICE
Do not use solvents such as acetone, silicone
spray, benzine, carbon tetrachloride, fire extin-
guisher fluid, dry cleaning fluid, lacquer thinner
or ammonia. These solutions attack the acrylic
surface.
You can use fine automotive acrylic rubbing and polish-
ing compounds to remove fine scratches on acrylic.
Vista™ Owner's Manual
™
Section Q
Page 3