Installation And Commissioning; Installation; Adjusting The Table-Top Height - Pfaff 487 Instruction Manual

8

Installation and commissioning

8

Installation

.01
The site where the machine is installed must be provided with suitable connections for the
electric current, see Chapter 3 Specifications.
It must also be ensured that the standing surface of the machine site is firm and horizontal,
and that sufficient lighting is provided.
8

Adjusting the table-top height

.01.01
Fig. 8 - 01
Loosen screws 1 and 2 and set the desired table-top height
●
Tighten screws 1 well.
●
Adjust the position of the pedal so that you can operate it comfortably and tighten screw 2.
●
The machine must only be mounted and commissioned by qualified personnel!
All relevant safety regulations are to be observed!
If the machine is delivered without a table, it must be ensured that the frame
and the table top which you intend to use can hold the weight of the machine
and the motor. It must be ensured that the supporting structure is sufficiently
sturdy, including during all sewing operations.
The method of packaging used requires that the table top be lowered for trans-
port. The following is a description of how to adjust the height of the table top.
1
Installation and commissioning
2
1
19