How To Make A Bag From A Foodsaver ® Vacuum Sealing Roll - FoodSaver V4880 series User Manual & Recipe Book

How to Make a Bag from a
FoodSaver
1. Open appliance door (I) and place roll into Roll Holder
(Fig. 1). For best results, insert roll with material flap down.
2. Lift up Roll Cutter Bar (K) and place bag material
beneath the cutter bar (Fig. 2).
3. Pull out enough bag material to hold item being
vacuum sealed, plus 4 inches (10.16 centimeters).
Lower the Roll Cutter Bar and slide Bag Cutter (L)
across the Cutter Bar (Fig. 3).
4. Press Seal Button (D). Red Seal Indicator Light
will illuminate (Fig. 4).
5. Using two hands, slowly insert open end of bag,
curl down, into Vacuum Channel (G) until
clamp motor starts.
6. When red Seal Indicator Light
sealing is complete. You may remove bag from
the Vacuum Channel (G).
7. You now have one sealed end (Fig. 5).
8. Now you are ready to vacuum seal with your new bag
(see next page).
9
Vacuum Sealing Roll
®
6
turns off,
www.foodsaver.ca 1-877-804-5383
Fig. 1
Fig. 2
6
Fig. 3
Fig. 4
Fig. 5
I
K
L
D
Insert Bag
Curl Downward
G
6