Reset Your Phone; Registration; Easy Registration For Additional Handset - VTech CS6114 User Manual

1. Press then
p q
2. Press then
p q
3. Press .
4. Enter the old system pIn.
5. Press then enter the new system pIn.
6. Press then enter the new system pIn again.
NOTE
If the new PIN entered in Step 6 is not matched with the new system PIN entered in
Step 5, you are requested to enter the valid system PIN again in Step 5.
7. Press to confirm the setting.
6.4

reset your phone

You can reset your phone to the default settings. After reset, all your personal settings,
call list entries and redial list entries will be deleted, but your phonebook remains
unchanged.
1. Press then
p q
2. Press .
3. Enter the 4-digit system PIN.
4. Press to confirm. The display shows "ConfIrM?" .
5. Press to re-confirm.
6.5

registration

Your handset and base station is pre-registered.
If for some reason, the handset is not registered to the base station, "reGISTer" will
be displayed on the handset screen, register your handset according to the following
procedure.
6.5.1

easy registration for additional Handset

1. Press and hold
2. Put the unregistered handset on the base cradle. The display will show "pleaSe
WaIT".
3. The handset will return to idle mode if the registration is successful. Repeat the
above steps if registration is failed, or try to register through the handset menu, as
instructed below.
to select bS SeTTInGS.
to select CHanGe pIn.
to select DefaUlT.
on the base until the In USe leD starts flashing.
29