Handle (Figure - Toro Super Recycler 20382 Operator's Manual

Adjust the cutting height as desired. Set all four wheels
to the same height.
Note: To raise the mower, move all 4 cutting height
levers forward; to lower the mower, move them all
rearward (Figure 11).
Adjusting the Handle Height
You may raise or lower the handle to a position
comfortable for you.
Rotate the handle lock, move the handle to one of three
positions, and lock the handle into position (Figure 12).
1. Handle lock
G017462
Figure 11
Figure 12
2. Handle positions
Starting the Engine
1. Pull the blade control bar to the handle (Figure 13).
2. Pull the recoil start handle (Figure 14).
Note: If the mower does not start, contact an
Authorized Service Dealer.
Using the Self-propel Drive
To operate the self-propel drive, simply walk with your
hands on the upper handle and your elbows at your
sides, and the mower will automatically keep pace with
you (Figure 15).
8
Figure 13
Figure 14
Figure 15