VTech 20-2432 User Manual page 20

LOW BATT TONE LOW BATT TONE (Handset only) LOW BATT TONE
LOW BATT TONE LOW BATT TONE
Select this option to turn the Low Battery warning tone On or Off. Press
OFF OFF ON ON
the OFF OFF or ON OFF ON soft keys, to make your selection. Press OK ON
your selection and return to the Handset Settings menu. When set to ON
the Handset will emit a warning tone when a Low Battery condition is
detected. This feature has been preset to ON
RANGE TONE RANGE TONE (Handset only) RANGE TONE
RANGE TONE RANGE TONE
Select this option to turn the Out of Range warning tone On or Off.
Press the OFF OFF OFF OFF or ON
OFF
confirm your selection and return to the Handset Settings menu. When
set to ON ON ON, the Handset will emit a warning tone whenever the Handset ON
ON
is taken out of range of the Base. This feature has been preset to ON
at the factory.
KEYPAD TONE KEYPAD TONE KEYPAD TONE
KEYPAD TONE KEYPAD TONE
Handset: Handset: Handset: Handset: Handset:
Select this option to turn the Keypad tones On or Off. Press the OFF
ON ON
or ON ON soft keys, to make your selection. Press OK ON
selection and return to the Handset Settings menu. When set to ON
Handset will emit a beep whenever a key is pressed. This feature has been
preset to ON ON at the factory. ON ON
ON
Base Unit: Base Unit: Base Unit:
Base Unit: Base Unit:
Press MENU MENU MENU MENU MENU, scroll to SETUP BASE
TONE; press OK TONE TONE
TONE TONE
choice.
CONTRAST CONTRAST CONTRAST
CONTRAST CONTRAST
Handset: Handset: Handset: Handset: Handset:
Select this option to adjust the contrast level of the Handset display. Use
the
will automatically adjust as you make your selection. Press OK
your selection and return to the Handset Settings menu.
Base Unit: Base Unit: Base Unit: Base Unit: Base Unit:
MENU MENU
Press MENU MENU, scroll to SETUP BASE MENU
CONTRAST; press OK CONTRAST CONTRAST
CONTRAST CONTRAST
OK OK
then press OK OK to confirm your choice. OK
SELECT TONE / PULSE AT THE BASE UNIT SELECT TONE / PULSE AT THE BASE UNIT SELECT TONE / PULSE AT THE BASE UNIT
SELECT TONE / PULSE AT THE BASE UNIT SELECT TONE / PULSE AT THE BASE UNIT
· · · · ·
With the Base Unit in the idle (OFF) mode, press MENU.
Scroll to SETUP BASE SETUP BASE SETUP BASE, then press OK SETUP BASE
SETUP BASE
· · · · ·
SET SET
· · · · · Scroll to SET SET PULSE/TONE SET
· · · · ·
Scroll to the desired LINE; press SET.
· · · · · Use the UP UP UP and DOWN UP
UP
- TONE TONE TONE TONE or PULSE TONE PULSE. Press OK PULSE PULSE PULSE
NOTE: Your 20-2432 20-2432 20-2432 20-2432 20-2432 is preset for TONE
most areas.
Handset and Base Settings Handset and Base Settings Handset and Base Settings
Handset and Base Settings Handset and Base Settings
ON ON ON soft keys, to make your selection. Press OK
ON
SETUP BASE SETUP BASE, then press SET SETUP BASE SETUP BASE
OK OK OK. Choose ON ON or OFF ON ON
OK ON
scroll keys to make your selection. The handset display
SETUP BASE SETUP BASE
SETUP BASE SETUP BASE, then press SET
OK OK. Press OK
OK
PULSE/TONE PULSE/TONE
PULSE/TONE PULSE/TONE, then press SET
DOWN DOWN arrow keys to highlight the desired dialing mode DOWN
DOWN
OK OK OK OK to confirm your choice.
TONE TONE TONE dialing, the desired mode for TONE
20
ON ON at the factory. ON
ON
OK OK OK to confirm your
OK
SET SET SET SET. Scroll to KEYPAD
OFF OFF, then press OK OFF OK to confirm your OK OK
OFF OK
and to adjust the screen contrast,
MENU. MENU. MENU. MENU.
OK OK. OK
OK
SET SET
SET. SET
SET. SET. SET. SET.
OK OK to confirm OK
OK
ON ON ON,
ON
OK OK to OK
OK
ON ON ON ON
OFF OFF OFF
OFF
ON ON, the ON
ON
KEYPAD KEYPAD KEYPAD KEYPAD
OK OK to confirm OK
OK
SET SET
SET SET. Scroll to