VTech 20-2432 User Manual page 12

Registration And Operation Of The 20-2422 Accessory Handset Registration And Operation Of The 20-2422 Accessory Handset
Registration And Operation Of The 20-2422 Accessory Handset Registration And Operation Of The 20-2422 Accessory Handset Registration And Operation Of The 20-2422 Accessory Handset
Your 20-2432 20-2432 system can operate up to 8 Handsets. 20-2432 20-2432
20-2432
The accessory Handset consists of the following:
Handset
1
3
5
Registration and Operation Registration and Operation Registration and Operation
Registration and Operation Registration and Operation
Belt Clip
Battery Pack
12
8 Handsets. 8 Handsets. 8 Handsets.
8 Handsets.
Charger Unit
Setup Of The 20-2422 Accessory Setup Of The 20-2422 Accessory
Setup Of The 20-2422 Accessory Setup Of The 20-2422 Accessory Setup Of The 20-2422 Accessory
Handset Handset
Handset Handset Handset
.
1 Plug the AC power adapter into
an electrical outlet.
2. Remove the Handset battery
cover by pressing on the indent
and sliding downward.
.
3 Place the new battery pack in the
Handset, with the metal contacts
aligned with the charge contacts
in the battery compartment.
4. Replace the battery cover by
sliding it upward.
5. Place the Handset in the Charge
Cradle, and allow it to charge for
12 hours. After the initial charge,
a maintenance charge of 8 hours
should be sufficient.