Chrysler 300 2010 Owner's Manual page 242

242 UNDERSTANDING YOUR INSTRUMENT PANEL
"Confirmation of Voice Commands" — If
Equipped
When ON is selected, all voice commands from the
uconnect™ system are confirmed. To make your selec-
tion, press and release the FUNCTION SELECT button
until "ON" or "OFF" appears.
"Park Assist System" — If Equipped
When ON is selected, the system will scan for objects
behind the vehicle when the transmission is in the
REVERSE or NEUTRAL position. To make your selec-
tion, press and release the FUNCTION SELECT button
until "ON" or "OFF" appears.
"Turn-by-Turn Navigation" — If Equipped
When ON is selected, the turn-by-turn directions will
appear in the display as the vehicle approaches a desig-
nated turn within a programmed route. To make your
selection, press and release the FUNCTION SELECT
button until "ON" or "OFF" appears.
"Display ECO" — If Equipped
The "ECO" message is located in the Compass/
Temperature display, this message can be turned on or
off. To make your selection, press and release the FUNC-
TION SELECT button until "ON" or "OFF" appears.
"Display Units of Measure in"
The EVIC, odometer, and navigation system (if
equipped) can be changed between English and Metric
units of measure. To make your selection, press and
release the FUNCTION SELECT button until "EN-
GLISH" or "METRIC" appears.
"Automatic High Beams" — If Equipped
When this feature is selected, the high beam headlights
will deactivate automatically under certain conditions. To
make your selection, press and release the FUNCTION
SELECT button until "ON" or "OFF" appears. Refer to
"SmartBeams" in Section 3.