Chrysler 300 2010 Owner's Manual page 238

238 UNDERSTANDING YOUR INSTRUMENT PANEL
functions and the navigation system (if equipped). Press
the FUNCTION SELECT button while in this display to
select English, Espanol, Deutsch, Italiano, or Francais.
Then, as you continue, the information will display in the
selected language.
NOTE: The EVIC will not change the uconnect™ lan-
guage selection. Refer to "Language Selection" under
"uconnect™" in Section 3.
"Lock Doors Automatically at 15 mph (24 km/h)"
When ON is selected, all doors will lock automatically
when the vehicle reaches a speed of 15 mph (24 km/h).
To make your selection, press and release the FUNC-
TION SELECT button until "ON" or "OFF" appears.
"Unlock Doors Automatically on Exit"
When ON is selected, all doors will unlock when the
vehicle is stopped and the transmission is in the PARK or
NEUTRAL position and the driver's door is opened. To
make your selection, press and release the FUNCTION
SELECT button until "ON" or "OFF" appears.
"Remote Key Unlock"
When Driver Door 1st Press is selected, only the driver's
door will unlock on the first press of the Remote Keyless
Entry (RKE) transmitter UNLOCK button. When Driver
Door 1st Press is selected, you must press the RKE
transmitter UNLOCK button twice to unlock the passen-
ger's doors. When All Doors 1st Press is selected, all of
the doors will unlock on the first press of the RKE
transmitter UNLOCK button. To make your selection,
press and release the FUNCTION SELECT button until
"Driver Door 1st Press" or "All Doors 1st Press" appears.
NOTE: If the vehicle is equipped with Passive Entry
and the EVIC is programmed to Unlock All Doors 1st
Press, all doors will unlock no matter which Passive
Entry equipped door handle is grasped. If Driver Door
1st Press is programmed, only the driver's door will