Chrysler 300 2010 Owner's Manual page 226

226 UNDERSTANDING YOUR INSTRUMENT PANEL
• SERVICE AWD SYSTEM — All Wheel Drive (AWD)
system is not functioning properly and service is
required.
• Normal Cruise Ready — When Adaptive Cruise Con-
trol (ACC) system is turned off and Normal (Fixed
Speed) Cruise Control mode is available. Refer to
"Adaptive Cruise Control (ACC)" in Section 3 (if
equipped).
• Cruise Off — When the Adaptive Cruise Control
(ACC) system is turned off. Refer to "Adaptive Cruise
Control (ACC)" in Section 3 (if equipped).
• ACC Ready — When the ACC system is activated.
Refer to "Adaptive Cruise Control (ACC)" in Section 3
(if equipped).
• ACC Set — After setting the desired speed in the ACC
system. Refer to "Adaptive Cruise Control (ACC)" in
Section 3 (if equipped).
• ACC Cancelled — To disable the ACC system. Refer to
"Adaptive Cruise Control (ACC)" in Section 3 (if
equipped).
• Sensed Vehicle Indicator — The system detects a
slower moving vehicle in the same lane. Refer to
"Adaptive Cruise Control (ACC)" in Section 3 (if
equipped).
• Driver Override — If you apply the accelerator after
setting the desired speed in the ACC system. Refer to
"Adaptive Cruise Control (ACC)" in Section 3 (if
equipped).
• Distance Set — After changing the desired following
distance in the ACC system, this message will display
momentarily. Refer to "Adaptive Cruise Control
(ACC)" in Section 3 (if equipped).
• Attention — If the ACC system predicts that its
maximum braking level is not sufficient to maintain