Chrysler 300 2010 Owner's Manual page 239

Hide thumbs Also See for 300 2010:
Table of Contents

Advertisement

unlock when the driver's door is grasped. With Passive
Entry, if Driver Door 1st Press is programmed touching
the handle more than once will only result in the driver's
door opening. You have to touch a passenger Passive
Entry equipped door handle to unlock all doors passively
when Driver's Door Only is programmed in the EVIC.
"Recall Memory with Remote Key Unlock" — If
Equipped
When ON is selected, you can use your RKE transmitter
to recall one of two pre-programmed memory profiles.
Each memory profile contains desired position settings
for the driver seat, side mirror, adjustable pedals (if
equipped), power tilt and telescopic steering column (if
equipped), and a set of desired radio station presets.
When OFF is selected, only the MEMORY switch on the
driver's door trim panel will recall memory profiles. To
make your selection, press and release the FUNCTION
SELECT button until "ON" or "OFF" appears. Refer to
"Driver Memory Seat" in Section 3.
UNDERSTANDING YOUR INSTRUMENT PANEL 239
"Sound Horn with Remote Key Lock"
When ON is selected, a short horn sound will occur when
the RKE LOCK button is pressed. This feature may be
selected with or without the Flash Lights with Remote
Key Lock feature. To make your selection, press and
release the FUNCTION SELECT button until "ON" or
"OFF" appears.
"Rain Sensing Intermittent Wipers" — If Equipped
When ON is selected, the system will automatically
activate the windshield wipers if it senses moisture on
the windshield. To make your selection, press and release
the FUNCTION SELECT button until "ON" or "OFF"
appears. When OFF is selected, the system reverts to the
standard intermittent wiper operation.
"Automatically Move Seat Back on Exit" — If
Equipped
This feature provides automatic driver seat positioning to
enhance driver mobility when entering and exiting the
4

Advertisement

Table of Contents
loading

Table of Contents