Child Lock - Bosch WFMC8400UC Operating Instructions Manual

i
If no buttons are pushed within 10
seconds the display will revert
back to normal Ready". Changed
settings will be retained.
Press the Select button until
q
Signal: continuous" is displayed.
While holding down the Select
button the volume of the acoustic
signal will increase.
When the signal has reached the
required volume, release the
Select button.
Hold down the Select button after
q
10 seconds the display indicates
Signal: max".
To deactivate the signal, when the
q
display indicates Signal: max",
hold down the Select button, after
10 seconds the display indicates
Signal: off".
i
The selected setting is retained
after the washing cycle.
You can select other settings by
pressing the Menu button and change
them by pressing the Select button.
Press the Start/Pause button.
q
The program starts.
The indicator light is lit.
i
The individual program steps are
indicated in the display field.
24

Child lock

You can secure your washing machine
to prevent selected functions from
being changed inadvertently .
If the child lock has been selected:
- No changes can be made while
the program is running.
- The door remains locked at the
end of the program.
Activating the child lock
Turn the program selector to
q
switch on the appliance.
Press the Menu button until Child
q
lock: off" is displayed.
G
The  " symbol flashes.
Press the Select button until
q
Child lock: on" is displayed.
When the menu is left, the 
symbol is permanently displayed.
i
You can set child lock on/off
before starting a program or in
Pause" mode only.
Starting a program with child
lock: on"
Turn the program selector to the
q
desired program.
Load the laundry and close the
q
door.
The Start/Pause indicator light
flashes (red).
Press the Start/Pause button and
q
hold down (5 seconds).
The program starts. The indicator
light is lit (red).
The child lock is activated.
i
To deactivate the child lock
temporarily press the Start/Pause
button again(5 seconds) until the
Start/Pause indicator light flashes.
Now you can change programs or
options. Press the Start/Pause
button to reactivate the child lock.
i
You can stop a running program
with activated child lock turning
the program selector to off"!
When you switch it on again the
interrupted program will continue.
Unloading laundry at the end
of a cycle with child lock: on"
Press the Start/Pause button and
q
hold down (5 seconds).
You can open the door and
remove laundry.
The child lock setting remains
activated even if you switch off the
appliance.
i
Next time you switch on the
appliance child lock is activated.
The door is locked and no
G
"
changes can be selected.
Press the Start/Pause button
(5 seconds) to open the door.
Deactivating the child lock
Turn the program selector to the
q
desired program to switch on the
appliance.
Press the Menu button until Child
q
lock: on" is displayed.
G
The 
Press the Select button until
q
Child lock: off" is displayed.
i
You can set child lock on/off
before starting a program or in
Pause" mode only.
" symbol flashes.