Display Field; Option Buttons; Indicator Light Above The Start/Pause" Button; Special Features - Bosch WFMC8400UC Operating Instructions Manual

Maximum spin speeds of the
programs
Revolutions per Type of
minute laundry/Extra
cycle
1200 Regular/Cotton
800 Permanent Press
600 Delicates/silk
400 Hand Wash
600 Comforter
800 Jeans
1200 XXTRASANITARY
1200 KIDSCARE
600 AQUAGARD
800 Wool
1200 Refresh
In the Regular/Cotton,
XXTRASANITARY, KIDSCARE and
Refresh programs the fabrics will be
spun at the maximum possible spin
speed.
In the Permanent press, Wool,
Delicates/Silk, Hand Wash,
Comforter, Jeans and AQUAGARD
programs, the washing machine spins
at a lower spin speed for gentle
treatment.
If required you can reduce the spin
speed of laundry, minimum is
400 revolutions per minute.

Display field

In the first line, the operating and
program progress text is displayed at
the left. The current time is displayed
on the right whenever Ready" is
displayed on the left.
In the second line, the display indicates
the spin speed and the time at which
the program is expected to be finished,
as well as symbols for Spin speed,
Washing mode, Pre Soak, Signal and
Child lock.
No final spin (---")
The water is drained from the machine
after the final rinse. Recommended for
delicate laundry.
Use this setting to avoid creasing if the
clothing cannot be taken out of the
washing machine immediately upon
completion of the cycle.
Program finished at
Indicates when the program will end.
Symbol for Mode: Normal
Wash"
This symbol is displayed if Mode:
Normal Wash" was selected.
Symbol for Mode: Quick Wash"
This symbol is displayed if Mode:
Quick Wash" was selected.
X
Symbol for Mode: Power Wash"
This symbol is displayed if Mode:
Power Wash" was selected.
o
Symbol for Pre Soak
This symbol is displayed if Pre Soak:
on was selected in the menu.
Z
Symbol for signal
This symbol is displayed if the signal
volume was not set to off.
G
Symbol for child lock
This symbol is displayed if Child lock:
on was selected in the menu.

Option buttons

e
ECO
This option reduces the amount of
energy used for the washing program
by reducing the wash temperature and
increasing the washing time. This
option is not available for cold
programs.
Rinse Plus
When this button is pressed, an
additional rinsing cycle will be added to
the selected cycle.
Washing cycle time is extended
accordingly.
Reduced Ironing
When this button is pressed, a gentler
spin speed with subsequent fluffing is
used. After the spin cycle the laundry is
arranged loosely in the drum -
wrinkling is reduced. Washing cycle
time is extended accordingly.
i
Remove the laundry as soon as
the spin cycle is complete.
Indicator light above the
Start/Pause" button
The indicator light conveys the
following information:
Indicator light flashing red:
-
Program can be started.
Adding laundry is possible
Indicator light is lit red: Program is
-
running.
Adding laundry is not possible
because the door is locked for
safety reasons.
Laundry may be added after pressing
the Start/Pause button.
i
Exception: If the child lock was
selected, the indicator light is off.
At the end of the program, the
door is locked!

Special features

Auto Load adjust
Auto Load adjust" adjusts the water
and energy consumption for each
program and determines the amount of
laundry and type of fabrics.
This process is built into your machine
and occurs automatically.
This control reduces water and energy
consumption when washing small
loads.
A flow sensor measures the water flow
rate and meters the exact volume of
water required for the load.
This sensor ensures the water level is
correct for washing your laundry - from
our economical Regular/ Cotton" and
Permanent Press" programs to the
Delicates/Silk", Hand wash", Wool",
AQUAGARD" and XXTRASANITARY"
cycles.
19