Operation; Manual Operation - Dimplex VF5452L Owner's Manual

Operation

Figure 2
A
B C
IR Remote Sensor
WARNING: This electric
firebox must be properly installed
before it is used.
The power switch
first be switched "I" to operate the
appliance.
An 'Opti-V' logo will appear on
the screen for about 3 seconds
before the flame picture starts .
! NOTE: The user may notice a
blank screen for approximately 5
seconds, every 30 minutes. This
is normal and should not be a
cause for concern.

Manual Operation

The manual controls for the
screen are located at the inner
top left hand side of the appliance
above the glass.
The mains (power) switch
10
D E F
(Figure 2A)
.
(Figure 2)
(Figure
may be used to switch the
2A)
appliance Off ("O") when it is not
required, for example, overnight
or for long periods, to avoid un-
must
necessary energy use.
! NOTE: Ensure that the mains
(power) switch shall remain read-
ily operable.
The standby button " "
is located just below the pow-
2B)
er switch. A red light will indicate
when the unit is in standby mode.
(Figure 2)
The volume of the wood fire
sound effects may be adjusted up
or down by pressing the volume
control buttons (
The screen brightness can be ad-
justed using the
(Figure 2F)
ton darkens the screen and the
(Figure
Figure 2C & 2D
(Figure 2E)
buttons. The
www.dimplex.com
).
and
but-