Electric and Gas dryers; clothes not dry in auto cycle.
Note: Always check wiring to the components.
Tested good.
Check that the dryer is
level or slightly tip
forward.
No.
Clean bars.
Section 3 Electronic Control Testing
Clothes not dry in the
auto cycle.
Using the on function test do the 3
O'clock test. (Refer to pages 8)
Are the sensor bars clean?
Check the connections at the bars
and the wiring between the control
Checks good.
Replace the
electronic control.
Failed test.
Yes.
and the bars.
Checks bad.
Tighten the con-
nections or replace
the wire.
3-29