Dodge Viper SRT 2013 User Manual page 17

Manual Seats
Forward/Rearward
• Lift up on the adjusting bar located at the
front of the seat near the floor and re-
lease at the desired position. Then, using
body pressure, move forward and back-
ward on the seat to be sure that the seat
adjusters have latched.
Recliner
• Lean forward in the seat and lift the
recliner lever, then lean back to the de-
sired position and release the lever.
• Lift the lever to return the seatback to an upright position.
Height Adjustment
• Ratchet the front lever, located on the outboard side of the seat, upward to raise the seat
height.
• Ratchet the lever downward to lower the seat height.
Do not place any article under a power seat or impede its ability to move as it may cause
damage to the seat controls. Seat travel may become limited if movement is stopped
by an obstruction in the seat's path.
• Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of
the seat could cause you to lose control. The seat belt might not be properly
adjusted, and you could be severely injured or killed. Only adjust a seat while the
vehicle is parked.
• Do not ride with the seatback reclined so that the seat belt is no longer resting
against your chest. In a collision, you could slide under the seat belt and be severely
injured or killed. Use the recliner only when the vehicle is parked.
GE T T I NG START E D
CAUTION!
WARNING!
15