Honeywell LYNX Touch Series Installation And Setup Manual page 39

SCREEN
Quick Exit
Yes
Restart Exit Time
No
Force Bypass
No
Exit Warning
No
Auto Stay Arming
No
Lack of Usage Notify
Disabled
Power-Up In Previous
Yes
Display Alarm Cancel
No
Display Exit Time
Yes
Cross Zone Delay
3 Minutes
Cross Zone 1
Disabled
Cross Zone 2
Disabled
WWW.DIYALARMFORUM.COM
Select "Quick Exit". The System toggles between Yes and No.
Select "Restart Exit Time". The System toggles between Yes and No.
SIA: The LYNX Touch SIA default is "Yes".
Select "Force Bypass". The System toggles between Yes and No.
UL installations: must be NO (no forced bypass)
Select "Exit Warning". The System toggles between Yes and No.
Note: This option is not selectable in the LYNX Touch SIA control and is always
enabled.
Select "Auto Stay Arming". The System toggles between Yes and No.
SIA: The LYNX Touch SIA default is "Yes".
Select "Lack of Usage Notify". The System scrolls between the following options:
Disabled
1 Day
7 Days
27 Days
90 Days
180 Days
365 Days
Select "Power-Up In Previous". The System toggles between Yes and No.
Note: If the previous state was Armed Away or Stay, the system will not respond to sensor changes for
1 minute. This allows time for sensors such as PIRs to stabilize.
UL installations: must be 1 (power up in previous state)
Select "Display Alarm Cancel". The System toggles between Yes and No.
Select "Display Exit Time". The System toggles between Yes and No.
Select "Cross Zone Delay". The System toggles between the following:
None
30 Seconds
1 Minute
90 Seconds
2 Minutes
3 Minutes
4 Minutes
Select "Cross Zone 1". The System toggles between the following:
Disabled
Note: If Cross Zone Delay is enabled the system will display the zones that are programmed with the
following Zone Types: Day/Night, Interior Follower and perimeter.
Select "Cross Zone 2". The System toggles between the following:
Disabled
Note: If Cross Zone Delay is enabled the system will display the zones that are programmed with the
following Zone Types: Day/Night, Interior Follower and perimeter.
- 39 -
LYNX Touch Installation and Setup Guide
Programming the Control
ACTION