Hdd Assembly (Only For The 'Kit' Version) - TrekStor USB-Storage 2.0 User Manual

2. PC with free USB 2.0 or USB 1.1 port
3. CD-ROM drive
4. 64 MB RAM or more
5. 20 MB free hard disk space
Technical Advice:
connected to an USB 2.0 host adapter. If it is connected to an USB 1.1 interface,
the transfer rate will be limited to USB 1.1 speed.

1.4 HDD assembly (only for the 'kit' version)

If you have not acquired the 'kit' version of this device, i.e. without integrated hard disk, you may want to skip this paragraph.
In case of the 'kit' version, a suitable hard disk (according to the casing) has to be built in. Be aware that the casing of the
DataStation with built-in hard disk must not be opened, otherwise the warranty is null and void (see Appendix A).
1. remove the screws (if there are any) from the sides of the casing. Use a screwdriver of appropriate size.
DataStation
In order to reach maximum transfer rates, the device has to be
1.4 HDD assembly (only for the 'kit' version)
3