Connecting The Datastation To A Computer; The 2.5 Inch Version - TrekStor USB-Storage 2.0 User Manual

2.2 Connecting the DataStation to a computer

2.2.1 The 2.5 inch version

Only for users of the DataStation - 2.5 inch version.
The provided USB Y-cable has one mini-USB connector and two USB-A connectors. The USB-A
connector with two cables on it is used for data transfer as well as for power supply of the station.
In some cases one single USB-A connector might not supply enough power. Therefore the second
USB-A connector (with only one cable on it) is intended for supplemental power supply. To ensure
correct operation of the DataStation also plug the second USB-A connector into an USB-port.
IMPORTANT:
Insufficient power supply as it may occur with only one USB-A connector plugged in,
may result in loss of data or even mechanical failure of the hard-drive. TrekStor is not
liable for any damage to the DataStation resulting from insufficient power supply.
Make sure the USB Y-cable is plugged in properly to ensure a save connection.
DataStation
TrekStor recommends to always connect both USB-A connectors.
2.2 Connecting the DataStation to a computer
7