Memory Configuration Table - SOYO SY-KT333 DRAGON Plus Quick Start Manual

SY-KT333 DRAGON Plus Quick Start Guide
ABR (Anti Burn Regulator)
SOYO' s ABR (Anti Burn Regulator) is specially designed hardware circuits that works hand in hand with
the CPU's internal sensor in monitoring the temperature of the CPU and prevent it from overheating.
Once the heat accumulated in the CPU is over the set limit. ABR will automatically shut down the system
power and warns you with a beeping sound. To de-activate the beeping sound, un-plug the AC power cord.
We recommend you to check the cause of the overheating and let the processor cool down before powering
on the system.
Note: ABR supports AMD Athlon XP and Morgan CPU. Thunderbird and Duron CPU is
not supported
Configure Memory
Step 2.
Your board comes with three DIMM sockets, providing support for up to 3GB of main memory using
unbuffered and non-ECC DIMM modules from 64MB to 1GB. On this motherboard, DRAM speed can
be set independent from the CPU front side bus speed. Depending on the DRAM clock speed setting in
the BIOS setup, appropriate memory modules must be used. For 100MHz DRAM speed, use
PC1600 memory; for 133MHz DRAM speed, use PC2100 memory; for 166 MHz DRAM speed, use
PC2700 memory.

Memory Configuration Table

Number of Memory Modules
RAM Type
Memory Module Size (MB)
Install Expansion Card
Step 3.
The motherboard has 1 AGP slot and 5 PCI slots.
1. Read the related expansion card's instruction document before inserting the expansion card into
the computer.
2. Press the expansion card firmly into expansion slot in motherboard.
3. Be sure the metal contacts on the card are indeed seated in the slot.
4. Replace the screw to secure the slot bracket of the expansion card.
5. Install related driver from the operating system.
DIMM 1 DIMM 2
DDR RAM (non-register & non-ECC)
128 / 256 / 512 / 1024 MB
12
DIMM 3