Table of Contents
Advertisement
SY-KT333 DRAGON Plus Quick Start Guide
3. Clip-on the second lock and please make sure not to damage/scratch the board.
4. Connect the power connector to CPUFAN1.
Note: If the fan is defective or Power connector is not connected to CPUFAN1, the system will enable
Fan Off Control function. See below for more information on FOC function.
When the CPU temperature exceeds, the temperature set in the CPU Temp. Protection in the BIOS
setup, SOYO's Anti burn Regulator (ABR) will automatically shutdown the system and beep until
the power button is press for one time.
2
DIMM1
10
DIMM3
Advertisement
Table of Contents
