Mazda 6 User Manual page 195

NOTE
When maximum cooling is desired,
set the temperature control dial to the
extreme cold position and set the air
intake selector to the
then set the fan control dial to
position 4.
If warmer air is desired at floor level,
set the mode selector dial at the
position and adjust the temperature
control dial to maintain maximum
comfort.
The air to the floor is warmer than
air to the face (except when the
temperature control dial is set at the
extreme hot or cold position).
Ventilation
1. Set the mode selector dial to the
position.
2. Set the air intake selector to the
position.
3. Set the temperature control dial to the
desired position.
4. Set the fan control dial to the desired
speed.
Windshield Defrosting and Defogging
1. Set the mode selector dial to the
position.
2. Set the temperature control dial to the
desired position.
3. Set the fan control dial to the desired
speed.
Foggy Windshield:
Using the
temperature control set to the cold
position,
position will cause the outside of the
windshield to fog up. Your vision will
be hampered, which could lead to a
serious accident. Set the temperature
control to the hot or warm position
when using the
NOTE
Operate the air conditioner in cool or cold
weather to help defog the windshield and
side windows.
1. Set the mode selector dial to the
Climate Control System
WARNING
position with the
For maximum defrosting, set the
temperature control dial to the
extreme hot position and the fan
control dial to position 4.
If warm air is desired at the floor, set
the mode selector dial to the
position.
In the , or
conditioner is automatically turned
on (however, the indicator light does
not illuminate) and the
is automatically selected to defrost
the windshield.
In the or position, the
position cannot be changed to
the position.
Dehumidifying (With Air
Conditioner)
desired position.
Interior Comfort
position.
position, the air
position
6-9