Turn And Lane-Change Signals - Mazda 6 User Manual

Driving Your Mazda
Switches and Controls
Headlight Leveling
The number of riders and weight of cargo
in the luggage compartment change the
angle of the headlights.
The headlight leveling switch adjusts this
angle.
Select the proper setting from the following chart.
Front seat
Driver Passenger
×
× ×
× ×
× ×
×
×: Yes
: No
Daytime Running Lights (Canada)
In Canada, vehicles must be driven with
the headlights on during daytime
operation.
For that reason, the daytime running lights
automatically turn on when the ignition
switch is turned to the ON position.
NOTE
The Daytime Running Lights turn off
when the parking brake is applied.
í
5-42
Some models.
í
Rear Switch
Load
seat Position
×
× ×
×
Turn and Lane-Change
Signals
Turn Signal
Move the signal lever down (for a left
turn) or up (for a right turn) to the stop
position. The signal will self-cancel after
the turn is completed.
If the indicator light continues to flash
after a turn, manually return the lever to
its original position.
Right lane
change
OFF
Left lane
change
0
0
Left turn
1
2
Green indicators on the dashboard show
3
which signal is working.
Lane-change signals
Move the lever slightly toward the
direction of the change
indicator flashes
will return to the off position when
released.
NOTE
If an indicator light stays on without
flashing or if it flashes abnormally, one
of the turn signal bulbs may be burned
out.
Right turn
until the
and hold it there. It