Switches And Controls; Lighting Control - Mazda 6 User Manual

Lighting Control

Headlights
To turn on the lights, turn the headlight
switch on the end of the control lever.
Switch Position
Headlights
Taillights
Parking lights
License lights
Dashboard
illumination
NOTE
If the light switch is left on, the lights
will automatically switch off 30
seconds after turning the ignition
switch to the LOCK position or
removing the key.
The lights will automatically switch
back on when the ignition switch is
turned to the ACC or ON position.
To prevent discharging the battery,
don't leave the lights on while the
engine is off unless safety requires
them.
Off Off On
Off On On

Switches and Controls

Lights-On Reminder
If lights are on and the key is removed
from the ignition switch, a continuous
beep sound will be heard when the
driver's door is opened.
Headlight High-Low Beam
Push the lever forward for high beam.
Pull back to original position for low
beam.
High beam
Low beam
Flashing the Headlights
To flash the headlights, pull the lever fully
toward you. The headlight switch does
not need to be on, and the lever will return
to the normal position when released.
Driving Your Mazda
5-41