Ambient Temperature Display - Mazda 6 User Manual

Clock
When the ignition switch is in the ACC or
ON position, the time is displayed.
Time setting
1. Press the CLOCK button until a beep
sounds, and 12Hr and 24Hr will be
displayed.
2. Press the SET button to switch between
12Hr and 24Hr displays. The
selected display will flash.
To select the desired clock setting,
press the CLOCK button again while
the preferred setting is flashing.
3. Hr. ADJUST will be displayed next,
and the hour portion of the display will
flash. Press the SET button to set the
hour, then press the CLOCK button.
4. Min. ADJUST will be displayed
next, and the minutes portion of the
display will flash. Press the SET button
to set the minutes, then press the
CLOCK button.
Time resetting
While the clock is displayed, press the
SET button 1.5 seconds or more. When
the button is released, a beep will sound
and the clock will be reset as follows:
(Example)
Interior Equipment
12:01 12:29→12:00
12:30 12:59→1:00
NOTE
When the SET button is released, the
seconds are reset to 00 .

Ambient Temperature Display

When the ignition switch is in the ON
position, press the AMB button to display
the ambient temperature.
NOTE
The displayed ambient temperature
may vary from the actual ambient
temperature depending on the
surrounding area and vehicle
conditions.
Press the AMB button 2 seconds or
more to switch the display from
Fahrenheit to Centigrade or vice
versa.
(With fully automatic climate
control system)
Press the AMB button again to
switch the display from ambient
temperature to the temperature set
for the air conditioner.
Interior Comfort
6-51