Table of Contents
Advertisement
Installation
The installation must be carried out by a suitably
qualified person, in accordance with the current
version of the following.
o UK Regulations and Safety Standards or their European
Norm Replacements.
o Building Regulations (issued by the Department of the
Environment).
o Building Standards (issued by the Scottish Development
Department).
o IEE Wiring Regulations.
o Electricity At Work Regulations.
Electrical connection
YOUR MICROWAVE IS INTENDED FOR FITTED AND
PERMANENT INSTALLATION.
o Before connecting the appliance, make sure that the supply
voltage marked on the rating plate corresponds with your mains
supply voltage.
o We recommend that the appliance is connected by a qualified
electrician, who is a member of the N.I.C.E.I.C. and who will
comply with the I.E.E. and local regulations.
o WARNING: THIS APPLIANCE MUST BE EARTHED.
o This appliance is supplied with a mains supply cable. It must be
wired into a 16 A double pole switched fused spur outlet, having
3 mm contact separation and placed in an easily accessible
position adjacent to the appliance. The spur outlet must still be
accessible even when your microwave is located in its housing.
o The wiring in the mains lead is coloured as follows:
Brown
Blue
Green and yellow
o As the colours of the wires in the appliance's mains lead may not
correspond with the coloured markings identifying the terminals
in your spur box, please proceed as follows:
Live
Neutral
Earth
35
Advertisement
Table of Contents
