Fixing The Appliance Into The Housing Unit; Troubleshooting - Baumatic BMC460SS Instruction Manual

o Do not position the microwave oven near a heat source. Please
note that transmitting and receiving equipment such as radios
and televisions can affect the operation of the microwave oven.

Fixing the appliance into the housing unit

IMPORTANT: NO
MICROWAVE ARE SANCTIONED BY BAUMATIC.
o Fully insert the appliance into the aperture hole and centre it.
o Ensure that none of the cables are kinked or compressed when
the appliance is in position.
o Screw the appliance to the aperture using the fixing screws and
bushings provided.
o The gap between the housing unit and the appliance must not be
closed by additional plinths.
o WARNING: The microwave will get hot during operation;
care should be taken not to accidentally come into contact
with the outer surface.
o WARNING: Children should not be allowed near to the
appliance unsupervised.

Troubleshooting

o The microwave will not switch on.
* Check that the appliance has been connected to the mains
supply correctly.
* Check that the fuse in the moulded plug has not blown.
* Check that the fuses in your fuse box have not blown.
* If fuses blow on a regular basis, then we would recommend that
you consult with a qualified electrician.
* Check that there has not been a power cut.
o The microwave will not start cooking.
* Check that the door is properly shut.
* Check that the door seal and surrounding area are clean.
* Check that you have pressed the start button.
OTHER METHODS OF INSTALLING THE
40