Advertisement
1997 F-150/250
22. Position the steering column locking levers on the steering actuator housing.
1. Use shop fabricated tool; refer to General Procedures in this section.
2. On tilt steering columns, install and compress the steering column position spring.
23. Tighten the lock cylinder housing screws.
http://www.fordtechservice.dealerconnection.com/pubs/content/~WSV1/~MUS~LEN/19/SV1B4007.HTM (18 of 20) [7/10/2007 4:46:03 PM]
Advertisement
