Advertisement
1997 F-150/250
9. Install the gearshift lever pin in the shift tube.
10. Install the gearshift selector tube spring (7379) in the shift tube.
Coat the end of the spring with Steering Gear Grease C3AZ-19578-A or equivalent
●
meeting Ford specification ESW-M1C87-A.
11. Install the transmission selector lever arm and support on the shift tube.
1. Position the transmission selector lever arm and support.
2. Install the bolts.
http://www.fordtechservice.dealerconnection.com/pubs/content/~WSV1/~MUS~LEN/19/SV1B4007.HTM (13 of 20) [7/10/2007 4:46:03 PM]
Advertisement
