1997 F-150/250
20. Install the (A) lock cylinder housing screws loosely and position the (B) steering actuator
housing in a vise.
Lubricate the lock cylinder housing screws with Rust Penetrant and Inhibitor F2AZ-
●
19A501-A or equivalent meeting Ford specification ESR-M99C56-A.
21. Position the (A) steering column lock cylinder housing and the (B) steering column shaft on
the (D) steering actuator housing.
Make sure the upper and lower (C) steering column lock actuators are aligned.
●
http://www.fordtechservice.dealerconnection.com/pubs/content/~WSV1/~MUS~LEN/19/SV1B4007.HTM (17 of 20) [7/10/2007 4:46:03 PM]