1997 F-150/250
3. Install the steering column lower bearing retainer.
1. Position the steering column lower bearing retainer.
2. Install the three bolts.
4. Install the steering column bearing.
Install the steering column bearing so that the inner race is visible when installed.
●
5. Install the ignition switch.
1. Align the ignition switch with the slot and index mark on the steering column.
2. Install the screws.
http://www.fordtechservice.dealerconnection.com/pubs/content/~WSV1/~MUS~LEN/19/SV1B4007.HTM (11 of 20) [7/10/2007 4:46:03 PM]